7 support@yardistrystructures.com
Note: It is critically important you start with square, solid and level base to attach your
Greenhouse.
The hardware to mount the structure permanently will need to be purchased separately at your local
hardware store.
Before preparing your surface for the structure please double check for possibility of any underground
utilities such as gas, telephone, cable or sprinkler lines.
Choose a level piece of land with good drainage and lots of sunlight. Ensure it is easy to get around for
essential cleaning and maintenance
The recommended area for site preparation is 2.27 m L x 1.95 m W (7.44 ft L x 6.39 ft W) for this structure.
Refer to your local building and city codes, ordinances, neighborhood covenants, or height restrictions
regarding this type of structure for guidance on acceptable installation requirements.
Following are some examples of how to prepare the location for the structure.
If you are using a soft, natural base, the following will be needed:
• Sand
• Landscape fabric
• 4 x 4 treated lumber for the base of the structure
• Hardware for attaching lumber together
• Hardware for mounting the structure to the lumber base
• Gravel
• Tie down kit
If you are using a concrete foundation, the following will be needed:
• Hardware for mounting the structure to the concrete base
Use the following dimensions for the concrete foundation.
Structure Location Preparation
7.44 ft
2.27 m
9.8 ft
2.99 m
6.39 ft
1.95 m
To Next Page
Loading...