51
TWO PERSON SWING MOUNT INSTALL
ALIGN BRACKET WITH
OUTSIDE EDGE OF
COUNTER-BORE
ALIGN BRACKET WITH
OUTSIDE EDGE OF
COUNTER-BORE
ALIGN BRACKET WITH
OUTSIDE EDGE OF
COUNTER-BORE
17-1/2” 17-1/2” 17-1/2”
-OR-
Choose location of Two Person Swing and re-locate
previously installed swing hangers if necessary.
Align bracket with outside edge of counter-bore and
mark location.
Align brackets with marks and screw to swing beam
-OR-
11”
TWO PERSON SWING MOUNT INSTALL
(12) 2-1/2” Wood screws
Verify Swing Brackets are in
contact with top of swing beam
when installing hardware.
To Next Page
Loading...