41
FINISH
Your (2) gable llers are now installed
GABLE PEAK FILLERS
x4
3" (7,6 cm)
3/16" (4,8 mm) Drill Bit
HINT:
Pre drill to avoid
HINT:
Pre drill to avoid
Screws
Screws
Install back gable ller support ush to back rafter.
Secure with (2) 3" screws angled into rafters.
Install front gable ller support WAF over ller panel and ush to vertical gable connectors.
Check WAF for level.
Secure with (2) 3" screws, as shown.
Install (1) gable ller panel ush to installed gable panel. Center the panel.
Secure with (4) 1-1/2" nails into rafter and (1) 1-1/2" nail into .
Install front gable ller panel ush to installed gable panel. Center the ller panel.
Secure with (4) 1-1/2" nails into gable ladder frame.
1
3
2
4
Nails
Nails
Outside View
Inside View
WAF
1-1/2" (3,8 cm)
x9
Install gable fi ller panels with the primed side facing outward.
PARTS REQUIRED:
Flush to
panel.
Flush to
panel.
Flush
Flush
Flush
Flush
x2
7-1/4 x 18-1/4" (18,4 x 46,4 cm)
WOOD GRAIN
x1
2 x 3 x 10-5/8" (5,1 x 7,6 x 27 cm)
x1
2 x 3 x 20-1/2" (5,1 x 7,6 x 52,1 cm)
WAF
To Next Page
Loading...