57
2
PARTS REQUIRED:
DOORS
Flush
OO
Set the doors on OO. Center the doors and mark .
3
Remove temporary supports and ensure that the doors open properly.
FINISH
You have nished installing your doors.
Screw hinge boards into wall supports and oor with (10) 3" screws, as shown.
.
4
Screws into the wall
Screws
Screw
Install OO ush under panels.
Secure to oor frame with (2) 3" screws .
3" (7,6 cm)
x12
OO
x1
69" Door Stiffener (175,3 cm)
OO
CENTER
3/8"
(1 cm)
Temporary Support
Temporary Support
To Next Page
Loading...