OPERATING THE LAWN MOWER
14
CUTTING HEIGHT ADJUSTMENT (Fig. 6)
A single height adjustment lever is used to adjust the cutting height. The lever is located beside
the right rear wheel, and has 7 height positions, ranging from 1 1/2 to 3 3/4" (3.81 to 9.5 cm).
Before making any adjustments, release the switch to turn the mower off, wait for blade to come
to a complete stop.
Simply move the lever (1) toward the wheel and then place it in the desired position. This will set
all of the wheels to the same height. To raise the height, release the height adjustment lever from
its current position, and pull it toward the back of the mower.To lower the height, release the
height adjustment lever from its current position, and push it toward the front of the mower.
HIGH
1
LOWLOWLOW
Fig. 6
To Next Page
Loading...
Need help?
General
