Yardworks 060-2385-8 User Manual

model number 060-2385-8 | contact us: 1.866.523.5218
Leaf Blower & Vacuum
 WARNING: To reduce the risk of injury, the user must read and understand the operator’s manual
before using this product. If you do not understand the warnings and instructions in the operator’s
manual, do not use this product.
READ AND SAVE THIS MANUAL. This manual contains important safety precautions which should be
read and understood before operating the product. Failure to do so could result in serious injury. This
manual should remain with the product. Specifications, descriptions and illustrations in this manual are
as accurate as known at the time of publication, but are subject to change without notice.
 NOTICE: Do not use E15 or E85 fuel (or fuel containing greater than 10% ethanol) in this product.
It is a violation of federal law and will damage the unit and void your warranty. FUEL MIXTURE for this
product is powered by a 2-cycle engine and requires pre-mixing gasoline and 2-cycle oil in a 40:1 ratio.
Pre-mix unleaded gasoline and 2-cycle engine oil in a clean container approved for gasoline. DO NOT
mix quantities larger than usable in a 30-day period.

Yardworks 060-2385-8 Specifications

General

Brand	Yardworks
Model	060-2385-8
Category	Blower
Language	English

Summary

Safety Instructions

Safety Definitions

Important Safety Guidelines

Covers general safety precautions for operation, personal protection, and work area.

Safe Operation Guidelines

Rules for using the product safely, including proper parts, maintenance, and handling.

Fuel Safety Precautions

Details on safe handling, storage, and refueling of flammable fuel.

Safety Symbols

Operation Symbols

Engine Starting and Control Symbols

Fuel and Mixture Symbols

Specifications

Controls and Features

Blower Controls and Components

Identifies and describes the function of blower parts like tubes, throttle, and handles.

Vacuum Controls and Components

Identifies and describes the function of vacuum parts like tubes, bag, and adaptors.

Assembly

Attaching and Assembling Tubes

Step-by-step instructions for assembling blower and vacuum tubes.

Vacuum Bag and Tube Installation

Instructions for attaching the vacuum bag, tubes, and impeller door.

Operation

Product Applications and Fueling

Outlines product uses and provides instructions for mixing fuel and refueling.

Starting and Stopping Procedures

Step-by-step guides for starting cold and warm engines and stopping the unit.

Blower and Vacuum Operation

Guidelines for proper operation of the unit in blower and vacuum modes.

Maintenance

General Cleaning and Safety

Filter and Exhaust System Care

Troubleshooting

Common Starting and Running Issues

Identifies common problems like fuel issues, spark, and tube installation.

Limited Warranty

General Warranty Coverage and Exclusions

Obtaining Warranty Service