4
Symbols
model no. 060-3864-2 | contact us: 1.866.523.5218
Some of the following symbols may be used on this product. Please study them and learn their
meaning. Proper interpretation of these symbols will allow you to operate the product better
and safer.
Symbol Name
V Volts Voltage
A Amperes Current
Hz Hertz Frequency (cycles per second)
W Watts Power
min Minutes Time
Alternating Current Type of current.
Direct Current
Type or a characteristic of current.
No Load Speed Rational speed, without a load.
Class II Construction Double-insulated construction.
/min Per Minute
Revolutions, strokes, surface speed, orbits etc.
per minute.
Wet Conditions Alert Do not expose to rain or use in damp locations.
Read the Operator’s
Manual
To reduce the risk of injury, users must read and
understand the Operator’s Manual before using
this product.
Eye Protection
Wear eye protection when operating this
equipment.
Ricochet
Thrown objects can ricochet and result in
personal injury or property damage.
Rotating tines
Danger – Keep hands and feet away from
rotating tines. Rotating tines can cause severe
injury.
Operating on a slope
Do not dethatch a slope that has an angle
greater than 15°.
Keep Bystanders Away Keep all bystanders at least 100’ (30 m) away.
n
o
To Next Page
Loading...
Need help?
General
