5 | Model BL80204-1
OPERATION
IMPORTANT INFORMATION FOR
RECHARGING HOT BATTERIES
When using a tool continuously, the battery pack will become hot.
You should let a hot battery pack cool down for approximately 30
minutes before attempting to recharge.
If the charger does not charge your battery pack under
normal circumstances, please call our customer service help line
at 1-800-633-1501 for assistance.
SAVE THESE INSTRUCTIONS
Look for this symbol to point out important safety precautions.
IT MEANS ATTENTION! YOUR SAFETY IS INVOLVED!
MAINTENANCE
WARNING:
When servicing, use only
identical replacement parts.
Use of any other part may
create a hazard or cause
product damage.
WARNING:
Do not at any time let brake
uids, gasoline, petroleum-based
products, penetrating oils, etc.
come in contact with plastic
parts. They contain chemicals
that can damage, weaken or
destroy plastic.
WARNING:
Do not attempt to modify or
create accessories not rec
-
ommended for use with this
charger. Any such alteration
or modication is misuse and
could result in a hazardous
condition leading to possible
serious personal injury.
DO NOT abuse power
tools. Abusive practices
can damage tools as well
as the workplace.
To Next Page