YASKAWA JVOP-182 - Page 22

6 Basic Operation
YASKAWA ELECTRIC TOBP C730600 35B YASKAWA AC Drive Option LED Operator Installation Manual 23
The following procedure is used to read parameters from the drive.
Note: Set parameter o3-02 (Read Allowable) to "1" (Enable) to read the parameter settings from the
drive. Set parameter o3-02 to "0" (disable) to protect the parameter settings in the LED Operator
Option.
Step Display/Result
1. Turn on the power to the drive. The initial display appears.
2. Press ･ to select the Parameter Setting and
Press .
3. Press ･･to select o3-01 (Copy Function
Selection) and press .
4. Press ･ to select 01.
5. Press and the LED Operator Option will read parameter
settings from the drive.
6. Automatically return to the Copy Function Selection display.
7. Press repeatedly until the display returns to the initial
display.
ALM
REV DRV FOUT
DIGITAL OPERATOR JVOP-182
DRV
ALM
REV DRV FOUT
DIGITAL OPERATOR JVOP-182
DRV