YASKAWA JVOP-182 - Product Overview; About the LED Operator Option; Compatible Drive Models

To Next Page

To Previous Page

8 YASKAWA ELECTRIC TOBP C730600 35B YASKAWA AC Drive Option LED Operator Installation Manual

2 Product Overview

◆ About This Product

The LED Operator Option provides an enhanced drive user interface that can operate the

Yaskawa drive at a short distance up to 3 meters. The LED Operator Option is an LED

display that simplifies the task of interfacing with the drive to perform these tasks:

• Read or modify drive parameters.

• Read and copy drive parameter settings to another Yaskawa drive.

• Operate the drive.

• Monitor drive operation status.

◆ Applicable Models

The LED Operator Option can be used with the drive models in Table 1.

Table 1 Applicable Drive Models

All keys except for the STOP key on the drives built-in LED operator will not function when

the LED Operator Option is connected to V1000 and J1000. <1>

<1> If desired, to also disable the STOP key on the drives built-in LED operator, set parameter o2-02 (STOP Key

Function Selection) to 0 (Disabled).

Drive Drive Software Version <1>

<1> See “PRG” on the drive nameplate for software version number.

A1000 ≥ 1010

J1000 ≥ 1010

V1000 ≥ 1016