Need help?Do you have a question about the YATO YT-83051 and is the answer not in the manual?
The main charging unit of the device.
Connects the rectifier to the electrical power network.
Cables with terminals for connecting to the battery.
Interface for operating and monitoring the rectifier.
Specifies the voltage output for charging different battery types.
Indicates the amperage delivered during the charging process.
Defines the range of battery capacities the charger can handle.
Maximum current drawn during initial connection or starting.
Describes the symbol for selective collection of electrical equipment.
Instructions for proper disposal and recycling of used devices.
Overview of the rectifier's capabilities and safety features.
Essential safety guidelines for operating the device.
Steps for connecting the battery and preparing for charging.
Instructions on setting voltage/current and monitoring charging.
Procedure for using the boost function to start an engine.
Steps to test the battery's charge level using the device.
Procedure to test the vehicle's alternator charging voltage.
Guidelines for cleaning, checking, and storing the rectifier.
General| Charging current | 200mA - 1000mA |
|---|---|
| Input Voltage | 220-240V AC |
| Compatible Battery Types | Lead-acid, AGM, Gel |
| Protection Features | Overcharge protection, Short-circuit protection |
| Battery type | Lead-acid |
To Next Page
