Yazoo YHR Series - OPERATING PROCEDURES; OPERATOR CONTROLS AND INDICATORS

-
i
,
i j OPERATING PROCEDURES
t ! . DESCRIPTION AND USE OF OPERATORS,
i CONTROLS AND INDICATORS.
I.
.1 This table has been divided into three (3) columns. The first column "KEY", is the
"
I key reference number on the associated illustration to aid in identification. The second column, "CONTROL OR INDICATOR" is the name and the third column,
"FUNCTION", is a brief functional description of that control or indicator.
!
i J KEY CONTROL/INDICATOR FUNCTION
I! 1 1 3-Position Key Switch Switches current to ignition
! r system as follows:
t STOP - open circuit,
f electrical system off.
1. RUN - current to
i
f; electrical system.
Ii START - is momentary
1. contact switch to engage
r
t ;\'~i . starter motor
,
\
1 2 Ammeter Indicates the rate of charge of alternator.
, 3 Hour Meter Measures and indicates the accumulative
,
} time that engine has run.
, '
; , 4 Throttle Control Manual engine speed
i \
I f control.
I i Full rear position is open
Full forward is closed position.
S Inclinometer Shows mower angle of incline
6 Manual Choke Allows easier start-up of cold engine when
the CHOKE is engaged.
7 Blade Control lever Engage/Disengage cutting deck blades.
~ '1
.r,- ,
; 1 9 YAZOO YHR-SERIES MOWERS
f OWNER'S MANUAL
'r
,
r
---