Yazoo YHR Series - Page 18

-
i
1
'0,
OPERATING PROCEDURES ~~J
I f
~i;"
!",'.~
8 NOTE - LOWERING or RAISING cutting section RE- f!~1
QUIRES that REAR HEIGHT BE 1/8" HIGHER THAN ~c~
FRONT at any setting chosen to ensure proper cut. .!
. .
3 Adding/deleting spacers (4) through (6) at the front caster wheels (14), or (15) I
through (20) at the rear carriage wheels (26) will change height.
4 Re-assemble parts (1) through (13) and adjust both front caster wheels (14) to
desired height using necessary combination of spacers (4), (5) and (6). Measure
height and record for reference.
S Re-assemble parts (15) through (25) and adjust both rear carriage wheels (26)
to the recorded height of front caster wheels (14) PLUS 1/8" using the necessary
combination of spacers (15) through (20).
0 .-GJ
0--- :::=~...~~g~
), ',8 ~ ~ @
0 A
g :~-@ (";:;\
@ ~
@',- @ @
(2"2) (23) g @
~@J ..~
~.
\ @
@
iff'
,,'
"
t ;
~ 17 YAZOO YHR-SERIES MOWERS
OWNER'S MANUAL ~