Yealink EXP20 User Manual

Yealink EXP20 User Guide
8
 Transfer
 Hold
 DND
 ReCall
 SMS
 Record
 URL Record
 Multicast Paging
 Group Listening
 Hot Desking
 ACD
 Zero Touch
 URL
 Phone Lock
 Directory
Note
EXP20 supports 20 physical keys and two pages, providing a total of 40 keys. The 20
additional keys are sorted from 21 to 40 and displayed on the second page. You can
configure the first Ext key (key 1) as the switch key. The key 21 will be configured as the
switch key automatically when you configure the first Ext key (key 1) as the switch key.
You can then press the first key to view the 20 additional keys or the key 21 to return to
the first page.
To configure the first Ext key as the switch key:
1. Click on DSSKey->Ext Key.
2. In the first Ext key field, select Switch from the pull-down list of Type.
3. Enter the desired value in the Label field or leave it blank.
Quick access features like intercom and voice mail should be configured on your SIP
server in advance to make sure they will work on your phone. Contact your system
administrator for more information.
If more than one expansion module is connected, select the desired expansion module
from the pull-down list of Expansion Key.
Feature codes may vary between different servers.
The available key features may vary between different phone firmware versions. This
guide introduces key features available on the SIP-T29G/T27P IP phone running firmware
version 80 or later.

Yealink EXP20 Specifications

General

Handset type	-
Product type	IP Phone
Product color	Black
Backlight display	Yes
Display resolution	160 x 320 pixels
Lines quantity	- lines
Phonebook capacity	- entries
Operating temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	10 - 95 %
Number of handles included	- pc(s)
Certification	CE, RoHS
Harmonized System (HS) code	85171800

Weight and Dimensions

Depth	110 mm
Width	112 mm
Height	143 mm