Yealink RoomCast User Manual

| Configurations on the Web | 12
Parameter Description
Network Isolation Enable or disable the network isolation.
Default: disabled. Generally, the devices connected to the Wi-Fi Hotspot
provided by the RoomCast can access the internet. However, if you enable this
feature, those devices can only share screens but cannot access the internet.
System Settings
This section introduces how to set the power and update schedule for the RoomCast.
• Power Schedule
• Power Saving
• Automatic Update
Power Schedule
If you enable this feature, the power saving mode automatically starts after the RoomCast is inactive for
a specified amount of time outside the defined working hours. You can set working hours and add up to 5
working hours. If you disable this feature, the RoomCast is in working status all the time.
Procedure
1. On the web user interface, go to System > Power Schedule > Power Schedule.
2. Enable Power Saving
3. Click Add, set the time, and click Save.
Note: If you add multiple working hours, they will take effect simultaneously.

Yealink RoomCast Specifications

General

Form factor	Desktop
Product color	Black
Cable lock slot	Yes
Cable lock slot type	Kensington
Wi-Fi standards	Wi-Fi 5 (802.11ac)
Cabling technology	10/100/1000Base-T(X)
Security algorithms	128-bit AES, WPA2-PSK
Networking standards	IEEE 802.3af
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Maximum frame rate	60 fps
Supported video modes	2160p
Maximum resolution (HDMI)	3840 x 2160 pixels
Supported graphics resolutions	3840 x 2160
Interface	HDMI
USB 2.0 ports quantity	2
Ethernet LAN (RJ-45) ports	1
Output voltage	12 V
Power source type	DC, PoE
Harmonized System (HS) code	85176990

Weight and Dimensions

Depth	72.5 mm
Width	145 mm
Height	23.5 mm
Weight	192 g