2
LED Indicator Instructions
LED indicators on the UVC20:
LED Status Description
Off The UVC20 is not properly connected to the PC.
Flashing green There is an incoming call in the client.
Solid green The UVC20 is active.
Solid red The UVC20 is muted.
Flashing orange The UVC20 is upgrading rmware.
Flashing red The UVC20 is in recovery mode and the rmware has
not been upgraded.
• Put on a Flat Surface • Mount on a tripod
• Adjusting the Camera Tilt
E
N
G
L
I
S
H
To Next Page
Loading...