Need help?Do you have a question about the Yealink W90 and is the answer not in the manual?
General| Ethernet Ports | 2 x RJ45 10/100/1000M Ethernet ports |
|---|---|
| Handset Redirection | Yes |
| Seamless Handover | Yes |
| DECT Codec | G.726, G.722, G.729 |
| Wireless Security | WEP, WPA/WPA2 (TKIP/AES), WPA3 |
| Number of Concurrent Calls | 8 |
| Centralized Management | Yes |
| Protocols | SIP |
| Security | WEP, WPA/WPA2 (TKIP/AES), WPA3 |
| Operating Temperature | 0°C to 40°C |
| Humidity | 10% |
Details methods for connecting the device to power and network, including AC and PoE options.
Provides instructions and dimensions for mounting the W90DM/W90B base station on a wall.
Methods to find the device's IP address using DHCP server or Yealink Discovery Tool.
Instructions on entering the device IP address into a web browser to access the interface.
Details on logging into the web interface using default admin credentials.
Steps to automatically detect and register the W90B base station to the W90DM via web interface.
Procedure for registering a single handset to the W90B base station through the DM.
Specifies the operating and storage temperature and humidity ranges for the device.
Details warranty policy and RoHS compliance information.
Covers general safety, environmental placement, and operational precautions.
Solutions for power, connection problems, and port debris.
Resources for firmware, guides, FAQs, product documents, and submitting technical issues.
To Next Page
