YEDI Perfect Under Pressure GV001 User Manual (English)

Questions and Answers:

L
Lance GrimesAug 17, 2025
Why is steam leaking from the side of the lid on my YEDI Electric Pressure Cooker?
- J
  Jennifer HermanAug 17, 2025
  If steam is leaking from the side of the lid of your YEDI Electric Pressure Cooker, it could be due to several reasons: * The silicone gasket might not be correctly placed. Ensure it's firmly pressed into place. * The silicone gasket might be damaged and needs replacement. * There might be food or debris on the silicone gasket; clean it thoroughly. * The lid might not be locked properly. Make sure to reposition the lid until it locks securely.
P
pennythomasAug 20, 2025
Why does steam rise non-stop from the steam vent of my YEDI Electric Pressure Cooker?
- A
  audrey20Aug 20, 2025
  If steam is constantly rising from the steam vent of your YEDI Electric Pressure Cooker, ensure that the steam vent handle is in the SEALING position. If the issue persists, it may indicate a pressure control failure, in this case you should contact customer support.
B
Becky LesterAug 22, 2025
Why is steam leaking from the float for more than 2 minutes on my YEDI Perfect Under Pressure GV001?
- D
  Dalton CoxAug 22, 2025
  If steam is leaking from the float of your YEDI Electric Pressure Cooker for more than 2 minutes, it could be due to: * Food debris on the float silicone seal inside the lid. Clean the float seal. * A damaged or worn-out float silicone seal. Consider replacing the float seal and contact customer support.
M
Matthew GarciaAug 26, 2025
What to do if my YEDI Perfect Under Pressure GV001 LCD displays NoPr?
- B
  Bianca JohnsonAug 26, 2025
  If the LCD of your YEDI Electric Pressure Cooker displays 'NoPr', it means the appliance isn't reaching the correct pressure during preheating. First, check for any steam or lid leaks, referring to the troubleshooting steps for those specific issues. If you are cooking frozen food, try restarting the selected program.
J
Joe WallaceAug 28, 2025
What to do if the lid won't open on my YEDI Perfect Under Pressure GV001 Electric Pressure Cooker?
- E
  Eric ScottAug 28, 2025
  If the lid of your YEDI Electric Pressure Cooker won’t open, it could be due to the following reasons: * There is still pressure inside. Wait for the pressure to release naturally, or carefully turn the steam vent handle to the VENTING position. The lid will unlock once all pressure is released. * The float might be stuck in the raised position. Gently press the float down.
M
maria69Aug 31, 2025
Why doesn't the float rise on my YEDI Electric Pressure Cooker?
- J
  Jesse McbrideAug 31, 2025
  If the float on your YEDI Electric Pressure Cooker doesn’t rise, it could be due to a couple of reasons: * There might not be enough food and/or liquid in the pot. Add water and ingredients according to your recipe, doubling the amounts if needed. Ensure you never exceed the maximum fill lines. * The float might be obstructed by the lid locking pin, indicating that the lid isn't closed properly. Reposition the lid to lock it correctly.
C
chuntSep 3, 2025
What does it mean when the LCD repeatedly flashes 'LID' on my YEDI Perfect Under Pressure GV001?
- S
  singletonchristopherSep 3, 2025
  If the LCD of your YEDI Electric Pressure Cooker repeatedly flashes 'LID', it means the lid is not correctly positioned for the selected program. When using pressure cooking programs, ensure the lid is locked in place. When SAUTÉing, remove the lid.
T
Travis SpencerSep 5, 2025
Why does my YEDI Perfect Under Pressure GV001 beep intermittently?
- S
  Sheri PayneSep 5, 2025
  If your YEDI Electric Pressure Cooker beeps intermittently, it indicates that the appliance is overheating and has reduced the temperature. This can be caused by starch deposits at the bottom of the inner pot, preventing even heat distribution. Press CANCEL, then inspect and remove any deposits on the bottom of the inner pot.
J
Jessica BenjaminSep 8, 2025
What does it mean when the LCD displays 'aa' on my YEDI Perfect Under Pressure GV001?
- P
  Patricia BrewerSep 8, 2025
  If the LCD of your YEDI Electric Pressure Cooker displays 'aa', it indicates that the inner pot has overheated. Press CANCEL, then check the pot to ensure it is not damaged or burned. Allow the pot to cool to room temperature before running the program again.
E
Edward BakerSep 12, 2025
Why does my YEDI Perfect Under Pressure GV001 Electric Pressure Cooker make clicking or light cracking sounds?
- Y
  ygriffinSep 12, 2025
  Clicking or light cracking sounds from your YEDI Electric Pressure Cooker are usually normal. These sounds can be caused by the power switching and expanding pressure while the appliance changes temperatures. However, if the outside base of the inner pot is wet, wipe both the inner pot and the inside of the base dry before using the appliance.

YEDI Perfect Under Pressure GV001 Specifications

General

Brand	YEDI
Model	Perfect Under Pressure GV001
Category	Electric Pressure Cooker
Language	English

Summary

Pressure Cooker Safety Guidelines

General Safety Precautions

Covers steam release valve safety, lid operation, hot surfaces, and proper placement.

Electrical and Usage Safety

Details correct electrical connection, intended use, and safe cleaning practices.

Product Specifications

Introduction to Your Pressure Cooker

Product Functions and Accessories

Lists the 10 functions and the various accessories included with the pressure cooker.

Pressure Cooker Main Vessel Parts

Key Components of the Cooker

Identifies and describes the main parts like the base, inner pot, and locking lid.

Understanding the Control Panel

Control Panel Button Functions

Explains the purpose of each button for various cooking programs and modes.

Control Panel LCD Display Guide

LCD Display Indicators and Symbols

Explains the meaning of symbols, numbers, and indicators on the LCD screen.

Sound Indicator and Settings

Details how to turn the sound on or off and the function of the sound indicator.

Common Control Panel Messages

LCD Display Message Interpretations

Lists and explains common messages shown on the LCD screen during operation.

Getting Started with Your Cooker

Initial Setup and Lid Locking Procedure

Guides on removing packaging, washing parts, installing components, and securely locking the lid.

Performing the Water Test

Water Test Steps for Functionality

Provides step-by-step instructions for the initial water test to confirm the cooker is functioning correctly.

Pressure Cooking Process

Running a Preset or Manual Program

Details the steps to start a preset or manual pressure cooking program.

Minimum Liquid Requirements for Pressure

Explains the minimum liquid needed to build and maintain pressure for cooking.

Pressure Cooking Completion and Memory

Cooking Completion and Keep Warm

Explains what happens when cooking is complete, including the Keep Warm function and auto-off.

Cooker Memory Feature Explained

Describes how the cooker remembers user preferences for future cooking.

Overview of Preset Programs

Preset Program Details and Cooking Times

Lists each preset program, its mode, purpose, and recommended cooking times.

Searing and Sautéing Functionality

Using the Sear/Sauté Feature

Provides steps for sautéing ingredients before pressure cooking, including temperature settings.

Slow Cooking Functionality

Operating the Slow Cook Feature

Guides on using the slow cook feature, including temperature and time adjustments.

Making Yogurt with Your Cooker

Yogurt Pasteurize and Culture Steps

Explains the two-part process for making yogurt: pasteurizing milk and culturing.

Delay Start Timer Function

Using the Delay Start Feature

Details how to set a delayed start time for cooking programs, with cautions for certain foods.

Cleaning and Care Instructions

Cleaning Cooker Parts and Gasket

Provides instructions for cleaning the stainless steel pot, gasket, and anti-block shield.

Cleaning Exterior and Base Rim

Guides on cleaning the outer body and inner base rim to prevent rust.

Troubleshooting Common Issues

Lid and Steam Leak Troubleshooting

Addresses issues like the lid not closing/opening and steam leaking from the lid or float.

Troubleshooting Control Panel Errors

LCD Messages and Sound Issues

Covers common LCD error messages and intermittent beeping or cracking sounds.

Troubleshooting Sensor and Temperature Issues

Temperature Sensor Error Codes

Addresses issues related to faulty temperature sensors and high temperature readings.

YEDI Perfect Under Pressure GV001 User Manual

Table of Contents