yeedi vac 2 pro - User Manual

Questions and Answers

J
Jacqueline NguyenAug 2, 2025
What to do if my yeedi Vacuum Cleaner is not charging?
- A
  Ann CampbellAug 3, 2025
  If your yeedi Vacuum Cleaner isn't charging, check these possible causes: the robot isn't switched on, it hasn't properly connected to the docking station, the power cord isn't firmly connected to the docking station, the battery is completely discharged, or the docking station isn't connected to the power supply. Here are some things to try: * Switch the robot ON. * Ensure the robot's charging contacts are connected to the docking station pins. * Verify the power cord is firmly connected to the docking station. * If the battery is completely discharged, reactivate it by switching the robot ON, placing it on the docking station for 3 minutes, removing it, and repeating this process 3 times before charging normally. * Confirm the docking station is connected to the power supply.
L
larasarahAug 6, 2025
What to do if my yeedi Vacuum Cleaner gets stuck?
- M
  Matthew MaxwellAug 6, 2025
  If your yeedi Vacuum Cleaner gets stuck while working, it might be tangled with something on the floor, like electrical wires, curtains, or carpet fringing. The robot will try to free itself. If it can't, manually remove the obstacles and restart it.
D
durhamginaAug 11, 2025
What to do if my yeedi vac 2 pro is stuck when mopping?
- S
  Stephanie ThomasAug 11, 2025
  Your yeedi Vacuum Cleaner may have difficulty climbing over obstacles when using Oscillating Mopping. If there's a problem, assist the robot.
T
Tracy McintoshAug 15, 2025
Why is my yeedi vac 2 pro Vacuum Cleaner not connecting to Wi-Fi?
- M
  melissa38Aug 15, 2025
  Your yeedi Vacuum Cleaner might not be connecting to Wi-Fi due to several reasons: an incorrect Wi-Fi username or password was entered, the robot is out of range of your Wi-Fi signal, or the network setup was started before the robot was ready. To resolve this, ensure you enter the correct Wi-Fi credentials, move the robot within range of the Wi-Fi signal, and make sure the robot is ready for network setup by turning it ON, pressing the RESET button for 3 seconds until it plays a musical tune and the Wi-Fi indicator light flashes slowly.
B
Brenda DanielsAug 19, 2025
Why does my yeedi vac 2 pro Vacuum Cleaner return to the Docking Station too early?
- J
  Jessica GrantAug 20, 2025
  Your yeedi Vacuum Cleaner might be returning to the Docking Station before finishing cleaning due to a few reasons. It could be operating in a dark environment, which you can fix by ensuring the room is well-lit. Also, when the battery is low it will automatically switch to Return to Charger Mode. This is normal, as is varied working time depending on floor surface, room complexity, and the selected Cleaning Mode. Another reason could be an untidy cleaning area, so remove small objects from the floor before starting the robot.
R
Richard RamirezAug 25, 2025
Why won't my yeedi Vacuum Cleaner return to the Docking Station?
- N
  Nathan HenryAug 25, 2025
  If your yeedi Vacuum Cleaner isn't returning to the Docking Station, there might be a few reasons. Check if the Docking Station is correctly placed, connected to power, and not moved. Also, make sure the robot is used in a well-lit environment, isn't paused for more than 60 minutes, and starts cleaning from the Docking Station.
M
Martin RodriguezAug 28, 2025
Why does my yeedi vac 2 pro Vacuum Cleaner make so much noise?
- S
  schmidtvalerieAug 28, 2025
  If your yeedi Vacuum Cleaner is making a lot of noise, the brushes might be tangled, or the dust bin could be stuck. Clear any debris that is stuck regularly.

Summary

Important Safety Instructions

General Safety Precautions

Essential safety guidelines for operating the appliance, including child safety, area preparation, and fall detection.

Usage and Handling Precautions

Instructions on proper use, power, wet hands, battery handling, environment, and body part safety.

Fire and Electrical Hazard Prevention

Warnings against picking up flammable materials, smoking items, blocked openings, and power cord damage.

Appliance Maintenance and Disposal Safety

Guidelines for safe repair, cleaning, battery removal, and disposal of the appliance and batteries.

Battery and Appliance Safety

Precautions for battery handling, charging, and preventing damage or misuse.

Temperature and Servicing Safety

Safety measures regarding extreme temperatures, proper servicing, and avoiding unauthorized modifications.

Operational Environment Safety

Ensuring a safe cleaning environment, avoiding candles, and restricting children's access.

Injury Prevention & Regulatory Compliance

Recharging and Battery Safety

Guidelines for using specified chargers, designated battery packs, and proper storage.

Injury Prevention & Regulatory Compliance

Guidance on preventing injury from moving parts and understanding device compliance with regulations.

FCC Interference Statement

Details on FCC limits for digital devices and potential radio interference.

RF Exposure and Wi-Fi Module Control

RF exposure limits, separation distances, and instructions for disabling/enabling the Wi-Fi module.

Package Contents

Included Accessories

Lists and illustrates all items included in the product package for initial setup.

Robot Diagram

Detailed illustration of the robot's components, buttons, sensors, and ports.

Dust Bin and Docking Station Diagram

Visual representation of the dust bin, its filters, and the docking station components.

Operating and Programming

Pre-Cleaning Preparation

Pre-cleaning steps to ensure efficient operation, including area tidiness and sensor considerations.

Assembly and Charging Procedures

Instructions for assembling the docking station, placing it, installing accessories, and charging the robot.

Using the yeedi App

Guide to connecting and using the yeedi mobile app for robot control and status monitoring.

Robot Operation Controls

How to start, pause, wake up, and power off the robot using its control buttons.

Oscillating Mopping Function

Steps for installing, adding water, and operating the oscillating mopping function for floor cleaning.

Maintenance

Oscillating Mopping Maintenance

Procedures for cleaning and maintaining the oscillating mopping components after use.

Dust Bin and Filter Cleaning

Instructions for cleaning and drying the dust bin and its filters for optimal performance.

Brush and Sensor Maintenance

Guidance on cleaning and maintaining the robot's main brush, edge brush, and mapping sensors.

Other Component Cleaning

Instructions for cleaning charging contacts and docking station pins.

Regular Maintenance Schedule

Recommended schedule for cleaning and replacing robot parts to ensure peak performance.

Indicator Lights and Troubleshooting

Robot Status Indicators

Explanation of the various indicator lights on the robot and their corresponding operational states.

Wi-Fi Connection Troubleshooting

Solutions for common problems related to connecting the robot to the home Wi-Fi network.

Robot Charging Troubleshooting

Troubleshooting steps for when the robot is not charging, including power and connection checks.

Navigation and Movement Issues

Resolving issues where the robot cannot return to the docking station or gets stuck during operation.

Operational Issues: Noise and Mopping

Addressing problems like excessive noise during cleaning or difficulty with mopping obstacles.

Wi-Fi Network Requirements

Detailed requirements for the Wi-Fi network and mobile phone to ensure successful robot connection.

Product Specifications

Model and Power Specifications

Technical specifications including model numbers, rated input, and rated output for the robot and docking station.

yeedi vac 2 pro Specifications

General

Suction Power	3000 Pa
Battery Capacity	5200 mAh
Water Tank Capacity	300 ml
Navigation System	Visual SLAM
Noise Level	67 dB
Mopping System	Oscillating mopping
Obstacle Avoidance	Yes
App Control	Yes
Connectivity	Wi-Fi (2.4GHz)
Voice Control	Yes
Runtime	220 minutes
Charging Time	6.5 hours
Auto-Empty Station Compatibility	Yes (sold separately)