Need help?Do you have a question about the yeedi cube and is the answer not in the manual?
General| Navigation Type | LDS Laser Navigation |
|---|---|
| Suction Power | 5100 Pa |
| Water Tank Capacity | 180 ml |
| Battery Capacity | 5200 mAh |
| Runtime | 180 minutes |
| Noise Level | 65 dB |
| Features | Multi-Floor Mapping |
| Connectivity | Wi-Fi |
Essential safety guidelines for operating the yeedi robot vacuum, covering usage and environmental precautions.
Details the various parts included in the yeedi robot vacuum package, such as the robot, station, and accessories.
Illustrations detailing the robot's exterior components and their locations for easy identification.
Key steps and considerations before initiating the robot's cleaning cycle for optimal performance.
Steps for initial setup, including removing protection materials and installing key components like brushes and base.
Guide to downloading, installing, and setting up the yeedi mobile application for enhanced control and features.
Instructions for connecting the robot to your home Wi-Fi network for app control and firmware updates.
Explanation of the primary buttons on the robot for initiating cleaning, spot cleaning, and returning to the charging station.
Details on returning to station, network setup combinations, and restoring default settings.
Explanation of robot and station indicator lights for status monitoring.
Recommended frequencies for maintaining robot parts and replacing consumables.
Steps for cleaning and maintaining the dustbin and washable filter assembly.
Instructions for cleaning the robot's vision system and edge sensors for accurate navigation.
Guide to cleaning the robot's anti-drop sensors and charging contacts for safe operation.
Steps to remove and clean the robot's main and edge brushes effectively.
Instructions for cleaning the robot's driving and universal wheels for smooth movement.
Steps for emptying the dirty water tank and cleaning base and filter components.
Resolving problems with connecting the robot to the yeedi app and home Wi-Fi network.
Solutions for the robot failing to charge, indicate charging status, or turn on.
Addressing issues like disorderly routes, repeated cleaning, getting stuck, or poor area coverage.
Troubleshooting excessive noise during cleaning and problems with the mopping pad water delivery.
Resolving voice prompts for water tank and issues with debris left behind after cleaning cycles.
Addressing the robot returning to charge before completing its cleaning task.
Solutions when the robot cannot find or return to the Cube Station for charging.
Troubleshooting warnings related to driving wheels and a full cleaning sink alarm.
To Next Page
