Yeelight CUBE Smart Lamp User Manual

8
Specifications
Model
YLFWD-0008/YLFWD-0009/YLFWD-0010
Rated Input
12V 0.21A, 2.5W (1pcs) 12V 0.8A,
10W (4pcs)
Rated Input (with adapter)
100-240V ~ 50/60Hz, 0.14A
Supported Platforms
Android 4.4 & iOS 10.0 or above
The maximum expandable quantity:
4pcs
Package Contents
Smart lamp x 1, adapter, controller, user
manual
Frequency Bands
2412MHz-2472 MHz (Wi-Fi), 2402-2480
MHz (BT)
Maximum Output Power
19.99 dBm (Wi-Fi) 7.82dBm (BT)
Wireless Connection
Wi-Fi IEEE 802.11 b/g/n 2.4GHz, Bluetooth
5.0 BLE
Replaceable control gear by an end-user.
Warning & Cautions
Please read the safety instructions carefully and keep it in a safe place.
1. Check the voltage before using the product. Improper voltage may damage the
product and cause potential safety hazards.
2. For indoor use only.
3. To prevent early equipment failure, the product should only be installed in operating
environment ranging between: 14°F to 77°F (-10°C to +25°C).
4. The equipment is not waterproof.
5. Regularly check the cable, the power supply and all other parts. Do not use this
luminaire when any part is damaged.
6. The external flexible cable or cord of this luminaire cannot be replaced. Do not use
the luminaire when the cable or cord is damaged.
7. The light source of this luminaire is not replaceable: when the light source reaches its
end of life the whole luminaire shall be replaced.
8. Do not disassemble the equipment privately.
9. Keep the equipment away from kids under 3-year-old.
10. The maximum recommended number of connections is 4pcs.
11. Please be careful to avoid being scratched by the sharp corners of the product.
12. Do not use the equipment when covered or recessed into a surface.
13. Under normal use of condition, this equipment should be kept a separation distance
of at lest 20cm between the antenna and the body of the user.

Yeelight CUBE Smart Lamp Specifications

General

Brand	Yeelight
Model	CUBE Smart Lamp
Category	Lighting Equipment
Language	English