EasyManua.ls Logo

YEEZOU Y201 User Manual

YEEZOU Y201
3 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Y201 Combustible Gas Detector Manual
Before use of this product, please read the instruction manual carefully.
General Instructions
Yeezou 201 combustible gas detector (hereinafter referred to as detector) has a high-
performance semiconductor gas sensor with excellent sensitivity, used for detection of leaking
combustible gases such as natural gas or propane in households, factories, hotels, apartments,
and other areas where gas leak localization is desired.
The detector is powered by 3 AAA batteries (not included). The hand-held portable design allows
you to check for gas leaks almost anywhere. The visual LED and audible alarm notify user of
presence and relative concentration of combustible gases. The varying audible ticking rate and
number of lit LEDs help a user determine the rate of gas leak. The quick response sensor bulb
with varying sensitivity dial allows detection of leaks both large and small.
Important Notes
To avoid damaging the sensor’s molecular membrane from overpressure, never use test gas
sources with directed high pressure (such as from a gas pressure nozzle) to do a gas leak test. We
suggest turning on and off a lighter or gas stove to leave gas in the air, then subsequently moving
the detector probe to the gas area to check functionality.
Test use of ultra-high concentration of combustible gas may reduce usability of the detector and
also lead to a flammable hazard.
Technical Specifications
1. Resolution: 50 ppm
2. Alarm range: 10% - 40% LEL
3. Operating temperature: 0 - 55
4. Relative humidity: 95% to avoid condensation
5. Warm up time: around 10 seconds
6. Response time: 2 seconds (10% LEL, Lower Explosive Limit)
7. Gas indication: Visual: 6 red LEDs,
Audible: variable speed ticking
8. Power: 3 x 1.5V AAA battery
9. Battery life: approximately 2 hours of continuous operation under normal usage conditions.
10. Weight: 8.9 oz (240 g) (without batteries)
11. Size: 18.5”x 2.76”x1.38” (47.0cm x 7.0cm x 3.5cm), housing material: plastic
Product Layout
1. LED gas level indicators
2. Warm-up indicator (yellow)
3. Power indicator (green)
4. Low battery indicator (red)
5. ON/OFF Power switch
6. Sensor tip and built-in sensor
7. Goose neck 12” (30 cm)
8. Speaker
9. Sensitivity adjustment dial
10. Battery cover
Question and Answer IconNeed help?

Do you have a question about the YEEZOU Y201 and is the answer not in the manual?

YEEZOU Y201 Specifications

General IconGeneral
BrandYEEZOU
ModelY201
CategoryGas Detectors
LanguageEnglish

Summary

General Instructions

Important Notes for Safe Gas Leak Testing

Advises against high-pressure gas sources for testing and suggests alternatives.

Technical Specifications

Details performance metrics like resolution, alarm range, operating conditions, and power.

Product Layout and Components Overview

Identifies key physical components of the gas detector.

Operation and Usage Guide

Warm-up Procedure and Indicator Lights

Explains the initial 10-second warm-up phase and its visual indicator.

Sensitivity Adjustment for Leak Detection

Guides on adjusting the sensitivity dial for accurate leak localization.

Low Battery Indicator and Action

Details the red low battery indicator and advises on battery replacement.

Maintenance and Storage Guidelines

General Maintenance and Cleaning

Covers cleaning, avoiding water contact, and verifying operation with test gas.

Storage Recommendations for Long-Term Use

Details conditions to avoid and battery removal for storage.

Warranty Information and Limitations

Warranty Coverage and Extended Options

Explains the one-year warranty and option for extended coverage.

Warranty Exclusions and Disclaimers

Lists circumstances where the warranty is not applicable.