Yellowtec iXm Getting Started

iXm Getting Started. Yellowtec 10 - 2009. Page 1 of 6
Congratulations to iX m , the powerful and easy to use reporter m ic ro phone with built - in
recorder. Before you start recording for the first time , you will need to charge the internal Li -
Ion accumulator battery to 100% capacity and to insert the S D card.
Preparation
C harging iXm
Connect the device to a USB - Port of your PC or a n USB - Charger by plugging - in the USB
cable . i Xm will indicate the charging process by a slow ly yellow blinking B AT indicator . T he
device need no t be switched on.
When the BAT indicator stops blinking , the internal Li - Ion a ccumulator b attery is full.
SD Memory Card
Insert the SD m emory c ard into the device as shown on the picture below . Push it to the
bottom and release it. The card sha ll snap in.
If you want to remove the card , press it down again to release it .
Getting Started

Yellowtec iXm Specifications

General

Brand	Yellowtec
Model	iXm
Category	Microphone
Language	English