To Next PageTo Next Page
Need help?Do you have a question about the YIHUA 706 Series and is the answer not in the manual?
General| Soldering Iron Heater Material | Ceramic |
|---|---|
| Model | 706 Series |
| Category | Rework station |
| Temperature Range | 200-480°C |
| Temperature Range (Soldering Iron) | 200-480°C |
| Temperature Range (Hot Air Gun) | 100-480°C |
| Airflow | 120L/min |
| Voltage | 220V |
Provides operational guidance for the anti-static rework station.
Company reserves the right to improve products and specifications without notice.
Essential safety measures to prevent electric shock, injury, fire, and damage.
Highlights specific features and technologies for the 852/902 series models.
Details advanced features and PID control for 706/852D+/862/872/952 series.
Informs about future product upgrades and screen display after upgrade.
Details specifications for hot air gun and soldering iron components.
Compares performance features across different models of the rework station.
Describes the suitable applications and uses for the rework station.
Step-by-step guide for operating the hot air gun with a fan.
Instructions for operating the hot air gun using a diaphragm pump.
Important notes and guidelines for safe and effective operation of the unit.
Explains the meaning of various symbols and codes displayed on the unit.
Critical warnings and advice to prevent damage and ensure safety during use.
Detailed steps for replacing the heating element of the hot air gun.
Instructions for replacing the soldering iron tip and its heating core.
Describes the suitability of the unit for various soldering and other purposes.
Guidance for operating the brushless fan hot air rework station.
Instructions for operating the diaphragm pump hot air rework station.
Steps for operating the soldering iron component of the station.
Ensures proper handle placement and cooling procedures for safety.
Guidelines for installing and handling nozzles to prevent damage.
Notes on initial operation, including potential smoke and safety warnings.
Explains standby mode indicators and sensor error codes.
Detailed procedure for replacing the hot air gun heating element.
Instructions for replacing the soldering iron tip and heating core.
Details nozzle specifications and their corresponding IC sizes.
Illustrates various 900M series soldering iron tips with dimensions.
