Warning!!!
Use the machine, the following basic measures should abide, avoid electric
shock or cause injury or damage caused by fires.
1.
2.
3.
4.
5.
6.
7.
8.
9.
To ensure personal safety, after the machine completed work, please turn
off the main power switch, and unplug the power cord if long time no use.
To ensure personal safety, you must use the original approval or recomm-
endation of the parts, otherwise it will lead to serious consequences.
Machine failure must be by professionals or the company designated per-
sonnel for repair.
This product is grounded three-wire plug,must be inserted within the thre-
ehole grounded outlet, do not change the plugs or use ungrounded three
adapter made it bad grounded.
Hot air gun or soldering station is open, its temperature are likely to reach
400 degrees. Do not use it near flammable gas, objects. Tube and the he-
at emitted very hot, can burn the body, do not touch the hot pipe and direct
injection to heat the human body.
Hot air gun is turned on, do not leave the jobs site.
When the hot air gun opening do not install nozzle, the heat pipe and the
nozzle must be cooling. Then installed the other nozzle.
Please keep inlet and outlet air flow, don't have obstruction.
After use, remember that the cooling body, the handle should be released
into the handle frame, then shut down the machine to sleep.
10. Do not use a soldering iron to weld outside the work; Do not iron percussi-
on table to clear the residual flux, this could seriously damage the iron.
11. The machine welding will take smoke, please do proper ventilation.
If the supply cord is damaged, it must be replaced by a special cord or
assemble available from the manufacturer or its service agent.
2.
WARNING: This tool must be placed on its stand when not in use.
3.
--Be careful when using the appliance in places where there are
combustible materials;
--Do not apply to the same place for a long time.
4.
--Be aware that heat may be conducted to combustible materials that are
out of sight;
--Do not leave the appliance unattended when it is switched on.
5. -- This appliance is not intended for use by persons (including children)
with reduced physical, sensory or mental capabilities, or lack of
experience and knowledge. Unless they have been given supervision or
instruction concerning use of the appliance by a person responsible for
their safety.
--Children should be supervised to ensure that they do not play with the
appliance.
1
I.
2.
3.
4.
5.
6.
7.
I. Products Feature
Using the new SAMSUNG microcomputer processor PID programmable tem-
perature control technology and implantation of the most high - end precision
PID program. The machine to every 20 ms as a cycle, using super speed to
tracking detection the gun and iron actual temperature and correction. Magic
temperature compensation to make its temperature stability. Temperature
error and temperature compensation rate, to beyond the same type of produc-
ts in the market. At the same time machine also upgraded the LCD display,
using the latest digital dynamic LCD screen, its beautiful appearance. Accura-
te display the gun / iron temperature and various functional instructions (air
gun automatic/ manual function, show Fahrenheit / Celsius display, iron dor-
mancy time etc . ) With dynamic volume instructions, display stick outa mile.
So operation is handy! At the same time the internal use of SMT double panel
manufacturing process, internal process system, the direction of signal clarity,
machine stability and safety performance is further improved, can adapt to a
variety of harsh environment.
The machine design three storage: CHI/ CH2/ Ch3. The user can according
to the use habit, or the device characteristics of assembling and disassembli-
ng , to set or storage three difference gun and iron temperature/ airflow /
display mode/ iron sleep time/ gun AT UO and Manual.
The user can according to three shortcut keyboard to into the storage quickly,
it is very suitable for standardization production work . Machine add cooling
funtion, can facilitate users ina particular environment of rapid dismounting
device or cooling and dust equipment.
The gun heater adopts a ceramic heater. Heating element firmly around the
model of ceramic, rapid and uniform heating up. Ceramic super high tempera-
ture and very tough material at long time high temperature under the condition
of no deformation, greatly enhance the heating element stability , prolong the
life of the heating element.
In the hot air gun automatic function unique safety protection function, the
power to open all the circumstances, the handle set intelligence design. So we
must be put the handle on the gun holder and take handle gain, and then its
can normally work. This design effectively avoid the air guns in unknown circ-
umstances use elsewhere caused by fire or other accidents.
The machine parts with self testing function, all the smart temperature [short
circuit / open circuit / overload and so on fault display and protection function.
Powerful human function design, with the following5 functions:
A. air gun automatic / manual function:
2
To Next Page
Loading...
