Power
Size
Weight
Work Environment
Storage Environment
Storage humidity
Airflow Type
Wind flow
Temperature Range
Temperature Stability
Display type
Handle length
Temperature Range
Temperature Stability
Tip-to-ground voltage
Tip resistance to ground
Display type
Handle length
8.
When choosing the automatic function, put the gun handle back on the hol-
der, the machine automatically cut off the heating up and cooling, its effect-
ively improve the heater service life and energy saving, good for environm-
ental protection and high safety factor. Can be effective to avoid hot air gun
handle caused by fire or other accidents. Select the manual function: When
the gun handle back on the holder,that the gun is not cool and keep in work.
Its very suitable for frequent operation and save cooling and heating time to
improve work efficiency , itis recommended to use the manual function
status was finished, please switching back to the automatic function to
improve safety! (see specific settings feature set described in 4)
B. Temperature correction function: Adapted due to environmental conditions
or the replace the heater/ fan blower / iron tips caused by iron or hot air gun
temperature deviation, this feature can be corrected temperature. Correct-
ion of temperature (See the specific set of feature set
described in 6-7)
C. Celsius/ Fahrenheit temperature display function: Meet different market
needs to design the temperature display mode. According to the custom to
choose. (See the specific set of feature set described in 5)
D. Iron sleep function: Iron automatic detection self working condition, when
not in use is at a standstill. Reaches the set time to sleep, iron temperature
automatic cooling to 2000C enter sleep state. Which can effectively prevent
the iron tips oxidation and prolong the service life, energy saving and envi-
ronmental protection. Sleep time can be provided with a range of powerful,
can set range:0 —99 minutes, walking for 1 minutes, the user can use to set.
if you don't want to sleep, can be set the sleep time at 0. ( See the specific
set of feature set described in 3)
E. Air gun with a protective function:lf the guns in the using process of the non
normal stop wind, that heater will stop heating to prevent gun burn out by
non wind, enhancing the safety performance of the product.
Iron part adopts import heater, quick temperature rise , temperature stability,
long service life,static design,prevent electrostatic damage the SMD element.
3
II. Specification
720W
L148xW99xH134mm ±5mm
2.6kg
O-500C/O-1220F
-20-800C/-68-1760F
Air gun part
Brushless fan soft wind
< 120L/min
1 oooc-4800C/ 2120F-8960F
LCD display
Soldering Iron
2000C-4800C/3920F-8960F
< 2mV
<20hm
LCD
>100cm
III. General Usage
1.
2.
Suitable for a various kind of soldering or de-soldering (removals)purposes of
the electronic components such as: SOIC, CHIP, QFP, PLCC, BGA, SMD, etc.
(Especially mobile phone's cable).
Shrinking, paint drying, adhesive removal, thawing, warming, plastic welding.
4
To Next Page
Loading...
