To Next PageTo Next Page
Need help?Do you have a question about the YILMAZ KM 213 and is the answer not in the manual?
Overview of the user manual's content and its importance for safe and efficient machine operation.
Contact details for technical problems and information on machine identification labels.
Explanation of various safety symbols and their corresponding precautions for machine operation.
Guidelines for preventing accidents, including employer responsibilities and operator training requirements.
General safety rules for machine operation, power cable management, and proper illumination.
Instructions for preparing the installation site, ensuring proper ground and machine placement.
Steps for safely connecting the machine to the power supply, including voltage checks and electrical connections.
Pre-operation checks, including cleaning the machine table and ensuring tools are correctly inserted.
Step-by-step guide for operating the machine, including clamping profiles and starting the milling process.
Routine maintenance procedures, including cleaning, lubrication, and checking cutting tools for damage.
Detailed instructions for safely replacing milling cutters, including necessary tools and precautions.
Procedure for adjusting air pressure for pneumatic systems, including setting values and draining water.
General| Power Source | Electric |
|---|---|
| Power | 1600 W |
| No-load speed | 5000 rpm |
| Blade diameter | 210 mm |
| Max cutting depth | 70 mm |
