19
Cleaning and Maintenance
ATTENTION: Keep the screws together and place them
in a safe area to reassemble the machine later.
Cleaning: Tub and Drum
Cleaning the Tub and Drum is recommended once
every 1 to 3 months depending on usage.
1. Open the Top Lid.
2. Use enclosed Allen Key to remove the 4 screws as
shown .
3. Take out the Drum by lifting it using both Drum Handles.
4. Wipe the exterior and interior clean using a soft cloth
and mild detergent.
• Place the Drum back in the machine making
sure to insert it exactly the way it was when
you took it out. The gear should be oriented
towards the right-hand side.
CAUTION
①
②
①
②
Remember to
tighten the screws.
To Next Page