1. Direction button
8-way point of view control button
2. Fire Buttons
There are six keys including 1, 2,3,4,5,6, they are used to control other actions of your
role. L-trigger and R-trigger are used analog signal. It can be set in special function
according to different games.
3. Function Buttons
Pressing button 8 can start the game or the game will pause in some special games.
Button 7 is “BACK”
button.
4. Left and right 3D stick
They are set in the deferent game according to the customer favorite.
5. MODE button
" Home" button or Converse mode
7. Turbo and Clear setting 。
7.1 Hold the key which you want to set it into turbo function, then press turbo key one
time. Then it is set in Turbo station.
7.2 Hold the key which you have set turbo function, then press turbo key again, it
can clear turbo setting.
Operation
1. Plug the receiver into one of USB port of your device , turn on your device .
2. Insert 2 AA batteries to the gamepad then press MODE button within 15 seconds,
4 port Led will rapid flash ,
3. When two Port Led light ,paired successfully
4. When you use on PC device , Default mode is Xinput, 1ST and 2ST port LED will
light , Hold the “Mode” button for five seconds, 1ST and 3ST port LED will light ,,it
turn to D-input mode successfully, you can press the “mode” button once to change
to digital mode, 3st LED will be off，4st LED will light. In this mode D-pad function
To Next Page
Loading...
Need help?
General