This document provides assembly instructions for the YITAHOME Rolling Cooler Cart, model numbers FTPLDB-2005 and FTPLDB-2014 (TZSK-V3). The device is a portable cooler cart designed for outdoor use, featuring a robust structure and convenient mobility.
Function Description:
The YITAHOME Rolling Cooler Cart serves as a portable storage unit for beverages and food, keeping them cool with its integrated cooler compartments. It is designed for easy transport thanks to its rolling casters and includes additional features for convenience during outdoor activities or gatherings. The cart's design incorporates two main cooler compartments, accessible via hinged lids, and a lower storage shelf for additional items. A side handle and an attached bottle opener enhance its utility.
Important Technical Specifications:
The cart is constructed from various panels and components, including:
- Side Panels (A): Two units, one with a drain hole. These form the vertical sides of the cooler.
- Bottom Panels (B): Two units, forming the base of the cooler compartments.
- Front/Back Panels (C): Two units, one with an iron rod for reinforcement. These form the front and back vertical sides.
- Inner Panels (D): Two units, likely forming the inner walls of the cooler compartments.
- Hinged Lids (E): Two units, providing access to the cooler compartments.
- Side Handle Brackets (G): Four units, used to attach the side handle.
- Bottle Opener (J): One unit, for convenience.
- Side Shelf (K): One unit, providing additional surface area.
- Drain Pipe Caps (L): One unit.
- Feet (M): Eight units, likely for stability or as part of the caster assembly.
- Hinge Plates (N): Four units, for the hinged lids.
- Drain Pipe (P): One unit, for draining melted ice.
- Screws (Q): Twenty-six units, for various attachments.
- Drain Pipe Connectors (R): One unit.
- Bottle Opener Screws (S): Three units.
- Inner Liner (U): One unit, likely the removable cooler liner.
- Casters (W1, W2): Two units of W1 (locking casters) and two units of W2 (non-locking casters).
- Reinforcement Rods (W): Two units, used to strengthen the structure.
The overall structure is designed to be sturdy, with specific components like the iron rod in panel C and reinforcement rods (W) contributing to its stability. The use of both locking (W1) and non-locking (W2) casters allows for both mobility and stationary stability.
Usage Features:
- Portability: Equipped with four casters (two locking, two non-locking), allowing for easy movement and secure positioning.
- Cooling Functionality: Features two main cooler compartments, designed to keep contents cold.
- Drainage System: Includes a drain hole (on one of the 'A' panels), a drain pipe (P), and a drain pipe cap (L) for convenient removal of melted ice water.
- Storage: Offers a lower shelf for additional storage, and a side shelf (K) for placing items.
- Convenience Accessories: An integrated bottle opener (J) is provided for ease of use. A removable inner liner (U) simplifies cleaning and maintenance.
- Hinged Lids: Two hinged lids (E) provide easy access to the cooler compartments.
- Reinforced Structure: The inclusion of an iron rod in one of the front/back panels (C) and reinforcement rods (W) enhances the cart's durability and load-bearing capacity.
Maintenance Features:
- Drainage System: The integrated drain hole and pipe facilitate easy removal of water, simplifying the cleaning process after use.
- Removable Liner: The inner liner (U) is likely removable, allowing for thorough cleaning and sanitation of the cooler compartments.
- Durable Materials: While specific material types are not detailed, the assembly instructions suggest a robust construction suitable for outdoor use, implying materials that are easy to clean and maintain.
- Assembly Note on Detachment: "Once installed, the product cannot be detached." This highlights the importance of careful assembly and implies a permanent, sturdy structure once built. This also suggests that maintenance or replacement of internal components might be limited once fully assembled.
- Cleaning Instructions (Implied): The presence of a drain and removable liner suggests that the cooler compartments can be easily rinsed and wiped clean.
Assembly Guidelines:
The manual emphasizes several key points for assembly:
- Preparation: Gather and organize all parts, and assemble on a flat, clean, and soft surface.
- Tools: A rubber mallet is recommended for convenient installation.
- Temperature: Avoid installation in low temperatures, as the product's structure is not designed for convenient assembly under such conditions.
- Directional Installation: Pay close attention to the accessory guides to ensure correct orientation of parts.
- Reinforcement: The iron rod in panel C is crucial for structural reinforcement, and its correct positioning is highlighted.
- Hinge Position: The position of the hinges for the lids (E) is critical and should be carefully observed during installation.
- Drain Pipe: Ensure the drain pipe is not stretched out too long, as this would prevent the cover (V) from fully covering the opening.
The YITAHOME Rolling Cooler Cart is designed for practical use, combining cooling capabilities with mobility and additional features for enhanced user experience in various settings.
Need help?
To Next Page
General