Yli Electronic YK-168 - User Manual

tested
Ger many
EMC
R
www.yli.cn
We create security
RFID/Digital Keypad
Control Station
Model:YK-168
INTRODUCTION
TECHNICAL DATA
YK-168 is an RFID and digital keypad control station,designed for access control and home security
applications.The control station provides 3 operation mode: i) RFID Card operation,ii) Digital Code
operation, iii) RFID Card+Digital Code combinations operation.
YK-168 provides multi-User Codes or single User Code, and provides manual code entry or auto
code entry.
YK-168 can be connected with door opening buttons and door bell, it has the safety functions as the
keypad locks or alarms after 5-10 false entries and tamper alarm.
YK-168 has advanced features with the Microprocessorand EEPROM non-volatile memory for reliable
performance.
YK-168 is fully keypad programmable, all programming proceed on the keypad.
YK-168 is a device of simple operation, easy to use, reliable functions; it is an ideal device for
office, home and factory in access control and security system installations.
Dimensions: 117Lx117Wx21H(mm)
Operating Voltage: 12VDC+10%
Current Drain: Quiescent State=25mA, Active State=70Ma (2 Relays actuated,
all LED lighted)
Relay Output Contacts: N.O. and N.C. Dry Contact, Max Rating of Contact Current 3A/24VDC
Capacity of Recording: 250 ID Cards, 250 Codes or 1 Common Code
Card Reading Distance: Max Distance 10cm
Type of ID card: EM Card, 125KHZ
Operating Temperature: -20℃-60℃
Operating Humidity: 10%-90%
Weight: 0.14kg
AUDIBLE & VISIBLE INDICATIONS
Definition of
Audible and
Visible Indications
Standby mode
Successful key entry
Successful card / code entry
Successful operation
Unsuccessful card / code
entry
Unsuccessful operation
Status
Indicator STATUS
Amber LED
1 Flash in 2 Sec interval
1 Flash then light for 10Sec
(Press # to return to standby
mode)
2 Flashes
2 Flashes
5 Flashes
5 Flashes
Output
Indicator
PASS
Green LED
Light
Audible Indicator
Buzzer
1 Beeps
2 Beeps
2 Beeps
5 Beeps
5 Beeps
In locking status
(no response to card / code
entry)
1 Flash in 10 Sec interval
1 Short beep in 10
secretary interval
1 Long beep finish
locking
LED
Light for
10Sec
Key Act
Lamp
KEY ACT
In programming mode
Light Light
1

Summary

Introduction to YK-168 Control Station

YK-168 Overview

Introduces YK-168 as an RFID and digital keypad control station for access control and home security.

Key Features of YK-168

Highlights RFID, digital keypad, multi-user codes, auto/manual entry, safety functions, and microprocessor.

Technical Data and Specifications

Device Specifications

Lists dimensions, voltage, current, relay contacts, capacity, reading distance, card type, temp, humidity, weight.

Audible and Visible Indicators

Maps specific indicator flashes, beeps, and light states to operational events like standby, entry, and errors.

Programming Operations

Programming Code and Feedback

Defines programming code, management code, master code, and explains LED/buzzer feedback for programming success/failure.

Entry into Programming Mode

Describes how to enter programming mode using the default or new programming code.

Recording and Deleting User Data

Details recording new programming code, user ID cards, and methods for deleting cards.

Door Operation and Timing Settings

Explains how to set door opening based on ID card/code and the duration the door remains unlocked.

User Code Management and Operation

Recording and Deleting User Codes

Details recording single/multi-user codes and methods for deleting them.

User Code Entry Modes

Explains manual vs. auto entry modes for user codes and how to exit programming.

Control Station Operation Modes

Lists the three ways to open the door: User ID Card, User Code, or Card + Code.

Safety Functions and Locking

Explains system lockout for false entries/tamper and behavior in locking state.

Restoring Default Programming Code

Details the steps to restore the factory default programming code using a jumper.

Installation and Wiring

Installer Notice and Precautions

Provides guidelines for installation, including proximity, wiring, and power checks.

Wiring Diagram - Power Supply

Shows how the control station connects to power and door bell via power supply.

Wiring Diagram - Direct Connection

Illustrates direct connection of the control station to the electric lock and door bell.

Yli Electronic YK-168 Specifications

General

Brand	Yli Electronic
Model	YK-168
Category	IP Access Controllers
Language	English