Yli Electronic YK-568L

To Next Page

www.yli.cn

We create security

YK-568L is an access controller with proximity card operation and code keypad operation,

supports 500 users, with vandal resistant function.

FEATURE

●

Model:YK-568L

INTRODUCTION

TECHNICAL DATA

Single Door

Noctilucence & Waterproof

Keypad W/

Voltage

12VDC

Distant: 65mm

Adjustment: ASK (125KHz)

Compatible Card: All 26-Bit EM Cards

Built-in Proximity Card Reader

Input Current

Operating Temperature: -31℃ to 63℃

Operating Humidity: 0 to 95%

Environmental Parameter

Dimension: 120L*76W*27H(mm)

Weight: 0.55kg

Mechanical Parameter

Standby: 40mA (Not include other devices)

Max: 130mA (Not include other devices)

YK-568L has 2 Mode：Common Mode & Secure Mode

A: Common Mode：Just 1 code（500 cards),everybody can use this code(500 cards).

For example, in your sales office, there are 20 salesman, and they know each other, if

you install a YK-568L here, you can use the Common Mode, because all your salesman

know this code(500 cards). No need to consider this is secure or not.

B: Secure Mode：in the condition of Secure Mode, any code/card can`t open the door.

For example, in holiday(off duty), when YK-568L is in Secure Mode, enter the code or

read the card, can`t open the door.

Change the Mode

When we produce YK-568L, the Mode is Common Mode, If need change Common Mode

to Secure Mode, or change Secure Mode to Common Mode, operate it as below:

1) From Common Mode to Secure Mode：Press"secure code"→#

2) From Secure Mode to Common Mode：Press"secure code"→#

Remarks：Secure Code when we produce is：3838

●

tested

Ger many

EMC

Need help?

Do you have a question about the Yli Electronic YK-568L and is the answer not in the manual?

Summary

Introduction

Technical Specifications

Mechanical Parameters

Details dimensions and weight of the YK-568L access controller.

Proximity Card Reader Details

Specifies read distance, adjustment frequency, and compatible card types.

Voltage Requirements

Indicates the required DC voltage for operation.

Input Current Specifications

Details standby and maximum current consumption.

Environmental Operating Conditions

Defines operating temperature and humidity ranges.

Product Features

Mode Configuration

Instructions on switching between Common Mode and Secure Mode.

Operating Procedures

Code Management

Steps to change program, open door, and secure codes.

Adding User Codes and Cards

Procedure for adding single codes or multiple cards.

Deleting User Codes and Cards

Instructions for removing single codes or cards.

Installation Guide

Wiring Diagrams

Wiring for Fail Secure Lock

Diagram showing connection for a fail-secure electric lock.

Wiring for Fail Safe Lock

Diagram showing connection for a fail-safe electric lock.

Factory Reset Procedure