YLINK 1GE+WIFI EPON ONU

Need help?

Do you have a question about the YLINK 1GE+WIFI EPON ONU and is the answer not in the manual?

Summary

Chapter 1 Product Introduction

1.1 Product Description

Provides a detailed description of the 1GE+WIFI EPON ONU, its purpose, and compliance standards.

1.2 Special features

Lists the key features and functionalities of the 1GE+WIFI EPON ONU.

1.3 Technical Parameter

Details the technical specifications, including interface, wavelength, and operating conditions.

1.5 Panel description

Chapter 2 Quick Installation

2.2 Quick Installation

Provides step-by-step instructions for physically connecting and powering on the ONU device.

Unit Installation Adjustment

Chapter 3 Configuration

3.1 Login

Explains the procedure to access the device's web interface for configuration.

3.2.2 WAN Connection Info

Shows configured IPv4 and IPv6 WAN connection details.

3.2.2.1 IPv4 connection Information

Details the configured IPv4 WAN connection parameters.

3.2.2.2 IPv6 connection Information

Details the configured IPv6 WAN connection parameters.

3.2.2.3 EPON Inform

3.2.3.1 WLAN Interface Information

3.2.3.2 LAN Interface Information

3.3 Network

Covers network configuration aspects.

3.3.1 Internet

Allows configuration of WAN connections, defaulting to bridge mode.

3.3.2 LAN

Manages the ONU's IP address, dynamic address distribution, and related parameters.

3.2.3.1 LAN IPv4 Address Settings

Configures the IPv4 address and subnet mask for the CPE's LAN access ports.

3.2.3.2 LAN IPv6 Address Settings

Configures the IPv6 address and subnet mask for the CPE's LAN access ports.

3.2.3.3 LAN IPv6 DHCP configuration

3.2.3.4 RA Configuration

3.3.3 WLAN Configuration

Allows configuration of basic WLAN settings like SSID, mode, and channel.

3.3.4.1 ITMS Server

3.3.4.3 LOID

3.3.5 QoS

Quality of Service configuration to manage network traffic priorities.

3.3.5.1 Policy Configuration

Allows configuration of QoS policies and queue settings.

3.3.5.2 QoS Classify

Defines rules for classifying and prioritizing network traffic.

3.3.7.2 Static Route

3.4 Security

Covers various security features and configurations.

3.4.1 WAN Access Configuration

3.4.2 Firewall

Configuration and management of the device's firewall settings.

3.4.2.1 Security Level

3.4.2.2 Attack Protection Configuration

3.4.3 MAC Filter

3.4.4 Port Filter

3.5.2 Advanced NAT Configuration

3.5.2.2 DMZ Configuration

3.5.2.3 NAT Configuration

3.5.4 IGMP Configuration

3.5.4.1 IGMP SNOOPING

3.5.4.2 IGMP Proxy

3.5.5 MLD Configuration

3.5.5.1 MLD SNOOPING Configuration

3.5.5.2 MLD Proxy Configuration

3.6 Management

Covers device management functionalities.

3.6.1 User Management

3.6.2 Device Management

Manages device operations like rebooting and upgrading.

3.6.2.1 Reboot

3.6.2.2 Upgrade

3.6.2.3 Restore Default

3.6.2.4 Config File Management

3.7 Diagnosis

3.7.1 Network Diagnosis

3.7.1.1 PING Diagnosis

3.7.1.2 Tracer Diagnose

Chapter 4 Examples

4.1 Internet service

Provides configuration examples for Internet service in bridge and route modes.

4.1.1 Requirement

4.1.2 Steps

Details the steps for configuring Internet service.

4.1.2.1 Bridge mode for Internet service

Example configuration for Internet service using bridge mode.

4.1.2.2 Route mode for Internet service

Example configuration for Internet service using route mode.

4.2 IPTV service

4.2.1 Requirement

4.2.2 Steps

Details the steps for configuring IPTV service.

Chapter 5 FAQ

2. Q: All indicators are not lit?

3. Q: Why Los indicator flashes?

4. Q: LAN indicators are not lit?

5. Q: PC cant visit web UI?

6. Q: User cant surf the Internet normally.

Troubleshooting steps for inability to surf the Internet.

7. Q: ONU stops to work after working for some time.