Yogasleep OHMA User Manual

1. Search “Yogasleep” or scan
the QR code with your
phone or tablet’s camera to
download mobile app from
the app marketplace.
• Supported devices: iOS
9.3.6 and later, Android 9
and later.
• The Yogasleep app is
not available on Pixel
or Windows phones at
this time.
• Ohma and the Yogasleep
app are currently only
supported for users in the
United States.
1. Open the Yogasleep app
and register for a new
account. Passwords must
be at least 8 characters and
include one capital letter
and one number or symbol.
2. A verication code will
be emailed to you. When
prompted, enter the code
in the app and press
“Register.”
3. You can now login to the
app by entering the email
and password that was
used to set up the account.
• If you did not receive a
verication code, rst
check your spam folder.
• You can request a new
verication code by
restarting the Registration
process.
1. For setup, place Ohma
near your router to ensure
Ohma is able to connect to
your network.
2. Plug Ohma into the wall
using the included power
adapter.
3. An audio prompt will direct
you to complete setup in
the app.
• Only use the power cord
that is provided with your
Ohma.
SETTING UP YOUR OHMA ALL-IN-ONE BABY MONITOR

Yogasleep OHMA Specifications

General

Sound Machine	Yes
Portable	Yes
Type	Sound Machine
Volume Control	Yes
Timer Options	90 minutes
Power Source	USB

Summary

Setting Up Your Ohma Baby Monitor

Download and Install the Yogasleep App

Download the Yogasleep mobile app from your device's app marketplace by searching or scanning the QR code.

Register for a New Yogasleep Account

Create a new account in the Yogasleep app, follow password requirements, and enter the verification code.

Plug In and Power On Ohma

Place Ohma near your router and plug it into the wall using the provided adapter to begin setup.

Connect Ohma to Your Wi-Fi Network

Connect your phone to a 2.4GHz Wi-Fi network and enter your Wi-Fi name and password in the app.

Link the Ohma Device to the App

Hold the QR code displayed on your phone in front of the Ohma camera to scan and pair the device.

Update Ohma Software and Yogasleep App

Ensure optimal performance by updating the Ohma device software and the Yogasleep mobile app.

Position Your Ohma Monitor for Optimal Viewing

Place the Ohma monitor facing the desired area, adjusting its angle for an unobstructed view.

Troubleshooting and Support

Perform a Factory Reset

Reset Ohma to factory defaults by holding the power button for 20 seconds to resolve issues.

Wi-Fi Connectivity Issues

Address Wi-Fi connection problems, including poor reception, setup errors, and network authentication.

Account and Registration Problems

Resolve issues with signing into the Yogasleep app or receiving verification codes during registration.

Managing Ohma Software and App Updates

Learn how to manually or automatically update the Ohma device software and the Yogasleep mobile app.

Common Ohma Usage Questions

Find answers to frequent questions about Ohma's features, placement, connectivity, and usage.