Need help?Do you have a question about the YOKO EP3000Y and is the answer not in the manual?
Details the key features and capabilities of the scanner device, including R&D, voltage design, chip, and optical technology.
Covers fundamental barcode settings like configuration codes, factory reset, version info, user config, and upload options.
Details how to configure the scanner's interface mode, supporting USB keyboard, USB to serial, and serial port connections.
Covers settings related to the serial port, including baud rate, data bits, stop bits, and parity.
Settings for configuring scanner feedback via buzzer volume, start-up beeps, good read beeps, error sounds, and good-read LEDs.
Allows selection of different keyboard layouts for the scanner's output, covering multiple languages.
Enables or disables various barcode symbologies (e.g., Codabar, Code 39, UPC-A, EAN, QR Code, Data Matrix).
Allows users to define and enable custom prefixes to be added to scanned data.
Allows users to define and enable custom suffixes to be added to scanned data.
General| Interface | USB, RS232, Keyboard Wedge |
|---|---|
| Resolution | 5 mil |
| Power Supply | 5VDC ± 5% |
| Light Source | LED |
| Scan Rate | 300 scans/sec |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -20°C to 60°C |
| Humidity | 5% to 95% non-condensing |
| Decode Capability | 1D, 2D barcodes |
| Drop Specification | 1.5m |
To Next Page
