YOKOGAWA 734 01 User Manual

iii
WARNING
■ Always observe the following instructions. Failure to do so
may result in electric shock or other dangers that may lead to
serious injury or the loss of life.
Testing leads
• Use the probes supplied by Yokogawa M&C with this instrument.
• Do not use testing leads that have deteriorated or are defective.
• Disconnect testing leads from the circuit under test before opening the
casing to replace the batteries or for any other reason.
• Disconnect testing leads from the circuit under test before attaching/
detaching the testing leads to/from the instrument.
• Disconnect testing leads from the instrument before opening the casing to
replace the batteries or for any other reason.
Casing
• Do not use the instrument if there is any damage to the casing or when the
casing is removed.
Fuses
• Use fuses of the specified rating when the fuse is replaced.
Operating Environment
• Do not operate the instrument in an atmosphere where any flammable or
explosive gas is present.
• Avoid using the instrument if it has been exposed to rain or moisture or if
your hands are wet.
Disassembly
• No person, except personnel from Yokogawa M&C, is authorized to
disassemble this instrument.

YOKOGAWA 734 01 Specifications

General

Brand	YOKOGAWA
Model	734 01
Category	Multimeter
Language	English