YOKOGAWA FLXA402 Quick Start Up Guide

TNA2001
Quick Start-up Guide
How to wire and set up the relays on the FLXA402
1. Wiring Relays
a. Cut any power to the analyzer
b. Unwire any sensor or OI connected to the upper rail. This will make it easier to
access the relays.
c. Remove the cover over the relays, but unscrewing the 2 phillips head screws ( they
are captive), and pulling straight out.

YOKOGAWA FLXA402 Specifications

General

Brand	YOKOGAWA
Model	FLXA402
Category	Media Converter
Language	English