1. Overview
1-2
TI 30A10A30-01E
ModelsandcustomizeddefaultconfigurationsofRecommended
Switches
Both Layer2 switch (L2SW) and Layer3 switch (L3SW) models are lined up as the
Recommended Switches.
L2SW is a device to connect stations and modules within a Vnet/IP domain.
L3SW is used for connecting Vnet/IP domains. Several models are available by input power type
and port variation type.
The Recommended Switches are customized with the default configuration (*2) to be dedicatedly
used in Vnet/IP networks. For any of a typical Vnet/IP network, the Recommended Switches
require no initial settings. (*1)
*1: The default parameters of the Recommended Switch are shown in Appendix 1.
Recommended L3SW has two configuration models for BUS1 or BUS2. Recommended L2SW has an identical configuration
model for BUS1 and BUS2.
*2: The default configuration is available only for the managed switches. The Unmanaged Switch does not have configuration
parameters.
Accessories for Recommended Switches
Following accessories are provided as optional for the Recommended Switches.
• SFP module
An SFP module is an optical transceiver to connect the Recommended Switches with an
optical fiber.
• Auto Configuration Adapter (ACA)
ACA is a USB memory for the Recommended Switches for saving/loading configurations
when changing the default configuration.
• Terminal cable for configuration
A terminal cable is for changing the configuration or checking the device status of the
Recommended Switch.
Note: An AC power cable for local regions is not included in the Recommended Switch.
An applicable AC power cable has to be prepared locally.
Sep. 19, 2014-00
To Next Page
Loading...
Need help?
General
