YOKOGAWA GRVSW-669FA - User Manual

Technical
Information
Network Switch for Vnet/IP
TI 30A10A30-01E
TI 30A10A30-01E
©Copyright Sep. 2011 (YK)
5th Edition Dec. 2016 (YK)
Yokogawa Electric Corporation
2-9-32, Nakacho, Musashino-shi, Tokyo, 180-8750 Japan
Tel.: 81-422-52-5634 Fax.: 81-422-52-9802

YOKOGAWA GRVSW-669FA Specifications

General

Category	Switch
Return Loss	50 dB min.
Switching Time	10 ms max
Storage Temperature	-20 to +60°C
Connector Type	FC

Summary

1. Overview

Features of Recommended Switches

1.1 Recommended Switch Models

1.3 Auto-Configuration Adapter (ACA)

2. Hardware Specifications

2.1 RS40 Family

Detailed hardware specifications for the RS40 family of switches.

2.2 MACH104 Family

Detailed hardware specifications for the MACH104 family of switches.

2.3 MAR1040 Family

Detailed hardware specifications for the MAR1040 family of switches.

2.4 SPIDER II Family (Unmanaged Switch)

Hardware specifications for the SPIDER II unmanaged switch.

2.5 Hardware Information

3. Configuration Backup;Restore

3.2 Configuration Backup to ACA

Provides a step-by-step procedure for backing up switch configurations to an ACA.

3.3 Restore configuration from ACA

Details the procedure for restoring switch configurations using an ACA.

4. Configuration Setup

4.1 Preparation for setting

Steps and parameters required to prepare for CLI configuration of the switch.

4.2 Summary of Command Line Interface (CLI)

4.3 CLI command

Details essential commands for configuring and confirming switch settings via CLI.

4.3.4 Restore to default (clear config factory)

How to reset the switch to factory default settings using a CLI command.

4.3.5 Save;Backup configuration (copy)

Commands for saving the current running configuration to startup configuration.

4.3.6 Port Disable for unused port (shutdown)

4.3.7 Set management IP address (network parms)

4.3.8 Cascaded domain connection by L3 SW

4.3.9 Configuring a ring network

Appendix 2. VLAN-based routing

Create VLANs

Virtual router port configuration for VLAN