i
TI 30A10A30-01E
Introduction
Yokogawa has started providing reliable industrial network switches for Vnet/IP based on a new
policy of “Yokogawa Certified Buyout.” These network switches, categorized as “Recommended
products,” are supplied with the default configurations customized for Vnet/IP and they are
referred to as the “Recommended Switch” in this document. The Recommended Switches
consist of two types of switches; one is “Managed” and the other is “Unmanaged.” Whenever the
word “Recommended Switche(s)” is used, both types are referred to in this document.
Please use these Recommended Switches to establish a Vnet/IP network.
All the Recommended Switches are dedicated for Vnet/IP. Refrain from using them as Ethernet
switches for non-Vnet/IP network such as an information bus.
This document is provided for those who have basic understanding of the Vnet/IP systems, and
contains the functions and specifications of the Recommended Switches. Read this document
thoroughly before configuring the Vnet/IP network and refer to the user’s manual attached to the
devices to obtain detailed information as well as to use them safely.
For details about Vnet/IP and how to set up a network, please refer to the following related
document.
Related document
TI 30A10A05-01E Vnet/IP Network Construction Guide
Drawing Conventions
Some of the drawings may be partially emphasized, simplified, or omitted, for the convenience of
descriptions.
Symbols in this Book
This book has the following symbols.
WARNING
Indicates precautions to avoid a danger that may lead to death or severe injury.
CAUTION
Indicates precautions to avoid a danger that may lead to minor or moderate injury or
property damage.
IMPORTANT
Identifies important information required to understand the operations or functions.
TIP
Identifies additional information.
SEE
ALSO
Identifies a source to be referred to.
Dec. 26, 2016-00
To Next Page
Loading...
Need help?
General
