EasyManuals Logo

Yokomo SO 1.0 User Manual

Yokomo SO 1.0
36 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #27 background imageLoading...
Page #27 background image
ボディの塗装&ボディ、ウイングの搭載
Paintingthebody&BodyandWingInstallation
●デカールの貼り方
・ボディ表面の保護シートを剥がしてから行います。
①デカールを台紙も一緒に切り抜きます。
②台紙の端の方を少しカットしてデカールを貼る位置に合わせます。
③位置が決まったら少しずつ台紙を剥がしながら位置がずれないように貼っていきます。
※デカールを貼る際に台紙を全部剥がしてしまうと気泡が入ったりシワの原因になります。
●Applyingthedecals
①Includethedecalbackingwhencuttingoutthedecals.
②Removeasmallpieceofbackingfromonecornerofthedecal.Positionthedecalandpresstheunbackedportionontothebody.
③Onceinposition,slowlyremovetheremainingbackingfromthedecal,andslowlypressthedecalontothebody.
※Applyingthedecalswiththebackingcompletelyremovedmaycausebubblesand/orwrinklestoform.
●ボディの塗装
ボディの内側(塗装面)を中性洗剤で油分やホコリを洗い流します。油分やホコリが付着していると、塗装後の剥がれの原因となりますので必ず洗ってください。洗浄後は水分を
しっかり拭取ってください。
塗装する前にウインド部分を塗装しないようボディ裏側からマスキングシートを貼ります。その際にマスキングシートがボディに密着していないとにじみの原因になるので注意し
てください。
塗料はポリカーボネイト専用(パクトラ製カラースプレーなど)を使用してください。スプレー塗料は1回で厚塗りしてしまうと塗料がたれたり、塗りムラができるので、全体に
薄く塗って乾かし2〜3回に分けて塗装するようにしてください。
※ボディ表面の保護シートは塗装後に剥がすようにしてください。
●Paintingthebody
Washtheinsideofthebodywithlukewarmwaterandamildsoapordetergent(suchasliquiddishwashingsoap)priortopainting.Oilresidueordust
willpreventthepaintfromadheringtothepaintingsurface,andpossiblycausethepainttopeellateron.Afterwashing,thoroughlydrythebodyto
allowthepainttoadhereproperly.
Beforepainting,applythepre-cutmaskingdecalstothewindowandlightareasontheinsideofthebody.Pressdowntheedgesofthemaskingtape
topreventpaintfromseepingthrough.
Useaspraypaintformulatedforuseonpolycarbonatebodies(suchasPactrabrandspraypaint).Sprayseverallightcoats,asevenlyaspossible.For
bestresults,alloweachcoattodrybeforesprayingthenextcoat.Avoidsprayingthick,heavycoats.Thismaycausethepainttorun,preventingthe
paintfromlookinguniformincolor.
Removetheouterprotectivefilmfromthebodyafterpaintinghasbeencompleted.
27
このページで使用するパーツ
Partsusedonthispage
ZC-OFFD
デカール×1
Decal
Z2-DTM2BA
マスキングシート
MaskingDecal
ZC-105A
マジックテープ× 1
VelcroTape(Oneofeach.)
※塗装してからデカールを貼ります。
Applythedecalsafterpainting.
ZC-105
マジックテープ
VelcroTape
ZC-105
マジックテープ
VelcroTape
◆反対側にも同様にボディ内側に貼ります。
Fortheoppositeside,applyinthesame
mannertotheinsideofthebody.
ZC-105
マジックテープ
VelcroTape
マジックテープは半分に
カットして使用します。
CuttheVelcrotapein
halfbeforeusing.
※ボディ形状はイラストと異なります。
ボディ搭載例として参照ください。
Thebundledcarbodyshellisdifferentfromtheillustration.
Thisisanexampleofbodyinstallation.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yokomo SO 1.0 and is the answer not in the manual?

Yokomo SO 1.0 Specifications

General IconGeneral
BrandYokomo
ModelSO 1.0
CategoryMotorized Toy Car
LanguageEnglish

Related product manuals