Yolink Plug Mini User Manual

13
About YoLink Control
YoLink Control is our unique device-to-device control technology. Using YoLink Control, YoLink
devices can be controlled without the Hub or an internet connecon. (Use of YoLink Control is
oponal; you can use the Automaon feature in the app OR use YoLink Control, but YoLink
Control offers the benefit of operaon without the Hub or internet connecon.)
One device controls another, directly. A device that sends out commands is called the controller. A
device that receives the commands is called the responder. Examples of a controller are a Door
Sensor or YoLink Plug Mini, while examples of a responder are another In-wall Switch or anoter
YoLink Plug Mini
To configure your YoLink Plug Mini as a co ntrolle r, Tu rn on the plug using POWER buon
or via Yo Link app (verify the Statu s LED of YoLink Plug Mini displays blu e). Press and hold
the POWER buon for 5-10 seconds u nl the LED quickly blinks blue
Upon pairing, the LED will stop blinking (this may happen aer only blinking two or three mes)
To configure a In-wall Switch as the responder. Turn on the switch using POWER buon or
via YoLink app (verify the Status LED of In-wall Switch displays white). Press and hold the
POWER buon for 5-10 seconds unl the LED quickly blinks blue
Pairing

Yolink Plug Mini Specifications

General

Brand	Yolink
Model	Plug Mini
Category	Remote Control
Language	English