EasyManuals Logo

YOODA MAGNETIC Series General Information

YOODA MAGNETIC Series
5 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
In order to fully explore available functions of MAGNETIC series please take a moment and read this manual before using the device. MAGNETIC transmitters
are compatible with all YOODA brand devices.
Illustrations (from the top):
Fig. 1. Single-channel CAMELEO control unit, white, front
Fig. 2. Single-channel CAMELEO control unit, white, back
General information
Detailed description
1. Control:
can control single motor
2. Memory:
up to 20 transmitters
3. Range:
200 meters outdoor,
35 meters indoor
4. Power supply:
230 V / 50 Hz
5. Output voltage:
230 V / 50 Hz
6. Output power:
300 W
7. Dimensions:
80 x 80 x 43 mm
8. Operating temperature:
frim 0°C to 50°C
9. Protection degree:
IP 30
10. Time of settings being saved
in case of power shortage:
up to 4 hours
Radio receiver range is a variable value and can differ from declared values depending on conditions in which device
operates. Possible sources of changes in range are building construction, interference caused by other radio transmitters
etc.
MAGNETIC_1CfT
www.sukcesgroup.pl
UP button
STOP button
DOWN button
L1 TIMER
PROGRAMMING button
P1 CONFIGURATION
CHANGE button
WORK MODE button
day of the week
minute
hour
current work mode
roller shutter
direction
lack of power
supply information

Other manuals for YOODA MAGNETIC Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the YOODA MAGNETIC Series and is the answer not in the manual?

YOODA MAGNETIC Series Specifications

General IconGeneral
BrandYOODA
ModelMAGNETIC Series
CategoryTransmitter
LanguageEnglish