York International AHR60D3XH21 User Manual

SINGLE PIECE AIR HANDLERS
FOR USE WITH SPLIT-SYSTEM
COOLING & HEAT PUMPS
MODELS: AHR18 THRU 60*
Due to continuous product improvement,
specifications are subject to change without notice.
Visit us on the web at:
www.york.com
Additional rating information can be found at:
www.ahridirectory.org
WARRANTY
Standard 5-year limited parts warranty.
Extended 10-year limited parts warranty when product is regis-
tered online within 90 days of purchase for replacement or
closing for new home construction.
ISO 9001
Certified Quality
Management System
TECHNICAL
GUIDE
TECHNICAL
GUIDE
1055361-BTG-B-0913
FOR DISTRIBUTION USE ONLY - NOT TO BE USED AT POINT OF RETAIL SALE
DESCRIPTION
This fan coil line offers the ultimate in application flexibility. This unit
may be used for upflow, downflow, horizontal right, or horizontal left
applications.
All JCI Unitary Products air handlers and coils use a TXV to provide our
customers with the optimum performance and refrigerant control. Air
handlers are shipped with “Flex-coils” without a factory installed meter-
ing device. For added flexibility, an R-22 or R-410A TXV or orifice can
be field installed to meet your refrigerant choice.
FEATURES
Thermal Expansion Valve - Provides the ultimate refrigerant con-
trol required for today’s high efficient product. The UPG bolt-on TXV
provides the added flexibility to convert the air handler to the required
refrigerant. The UPG TXV is a true bolt-on which does not require braz-
ing to replace or install.
Insulated Cabinet - All air handler cabinets are thermally insulated
with 3/4” foil faced insulation to prevent sweating.
Factory Sealed - Achieves 2% or less total airflow leakage rate at
duct blaster field test conditions for system airflow verification.
Durable Finish Inside and Out - Air handler casings are made of
pre-painted galvanized steel which provides a better paint to steel bond
that resists corrosion and rust creep. All internal coil sheet metal parts
are made of G60 galvanized or prepainted G30 galvanized.
Filters - All models have internal filter racks provided for use with 1”
thick standard size filters.
Electric Heat Kits - New 6HK series of field installed electric heat
kits are available for installation friendly and easy service applications.
These 6HK kits are unique to these new models.

York International AHR60D3XH21 Specifications

General

Model Number	AHR60D3XH21
Category	Heat Pump
Brand	York International
Refrigerant Type	R-410A
Cooling Capacity (BTU/h)	60000
Heating Capacity (BTU/h)	60000
Voltage (V)	208/230

Summary

Technical Guide Overview

Product Description

Details the fan coil line's application flexibility and use with split-system cooling and heat pumps.

Key Features

Highlights features like Thermal Expansion Valve, insulated cabinet, factory sealed construction, and filter provisions.

Product Warranty Information

Outlines the standard 5-year and extended 10-year limited parts warranty terms.

Dimensions and Duct Connections

Unit Dimensions

Provides detailed measurements (A-F, J, K) and refrigerant line sizes for various air handler models.

Coil Technical Data

Lists coil specifications including size, rows, fins per inch, tube geometry, and fin type for each model.

Cooling Capacity Data

Application Factors

Rated CFM vs. Actual CFM

Table showing capacity factors based on percentage of rated airflow (CFM).

Physical and Electrical Data

Cooling Only Specifications

Details blower dimensions, motor HP, voltage, amps, filter type, and shipping weight.

Power Conversion Factors

Provides conversion factors for power distribution voltages to kW and MBH.

Electric Heat Kit Performance

Minimum Fan Speed Requirements

Specifies minimum fan speeds (Low, Med, High) required for electric heat kits with air handler models.

Heat Performance Data

Details total heat output (kW, MBH) and staging for electric heat kits at various voltages.

Electrical Data: Single Source Power Supply (208/230-1-60)

Electrical Data: Multi-Source Power Supply

208/230-1-60

Electrical specifications for single-phase power supply with multiple sources.

208/230-3-60

Electrical specifications for three-phase power supply with multiple sources.

Applications, Accessories, and Limitations

Typical Applications

Illustrates common installation configurations like upflow, downflow, and horizontal airflow.

Available Accessories

Lists optional accessories such as TXV kits and electric heaters.

Installation Limitations

Outlines wiring, installation, and voltage limitations required for safe operation.

Typical Thermostat Connections

Air Flow Data (CFM) - 208 Volt

Air Flow Data (CFM) - 230 Volt

Notes and Publication Information