EasyManua.ls Logo

York International P3HMX14F10001 User Manual

York International P3HMX14F10001
32 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
1
OIL-FIRED WARM AIR
FURNACE
P2HMX12F08001 P3HMX14F10001
P3HMX20F12001
(Upflow or Horizontal Models)
P3LBX12F08001 P3LBX14F12001
(Lowboy Models)
INTRODUCTION...............................................................2
HEAT LOSS......................................................................2
LOCATION OF UNIT ........................................................2
AIR CONDITIONING.........................................................4
COMBUSTION AIR...........................................................4
CHIMNEY VENTING.........................................................4
OIL TANK..........................................................................6
PIPING INSTALLATION ...................................................6
ELECTRICAL CONNECTIONS ........................................6
CIRCULATING AIR BLOWER..........................................7
OIL BURNER ....................................................................8
FURNACE INSTALLATION SET-UP................................9
MAINTENANCE AND SERVICE.....................................10
OPERATING INSTRUCTIONS .......................................10
TABLE A-1: BECKETT OIL BURNER SET-UP .............11
TABLE A-2: DIRECT DRIVE BLOWER SET-UP ...........11
TABLE A-3: DIRECT DRIVE BLOWER
CHARACTERISTICS ......................................................12
GENERAL DIMENSIONS – P*HMX MODELS ...............14
GENERAL DIMENSIONS – P3LBX MODELS................15
APPENDIX B: WIRING DIAGRAM.................................16
WIRING NOTES..............................................................17
R7184 DETAILED SEQUENCE OF OPERATION..........18
TABLE C-1: ST9103 DETAILED SEQUENCE OF
OPERATION...................................................................20
TABLE C-2: CAD CELL RESISTANCE ........................21
TABLE C-3: R7184 TROUBLESHOOTING...................21
TABLE C-4: SYSTEM AND GENERAL
TROUBLESHOOTING....................................................24
AIR FILTER LOCATIONS...............................................27
REPAIR PART LIST – P3HMX14F10001 &
P3HMX20F12001............................................................28
REPAIR PART LIST – P3LBX12F08001A &
P3LBX14F12001A..........................................................29
REPAIR PART LIST – P2HMX12F08001.......................30
REPLACEMENT PART CONTACT INFORMATION......31
INSTALLATION
MANUAL
CONTENTS
Read this manual completely before beginning
installation.
Important: These instructions must be kept with
the furnace for future reference.

Other manuals for York International P3HMX14F10001

Questions and Answers:

York International P3HMX14F10001 Specifications

General IconGeneral
Model NumberP3HMX14F10001
CategoryFurnace
Heating Capacity100, 000 BTU
Efficiency80% AFUE
StagesSingle Stage
IgnitionHot Surface Ignition
Warranty10-Year Limited Warranty

Summary

Installation Procedures and Site Requirements

Introduction, Heat Loss, and Unit Location

Overview of the furnace, heat loss calculation, and optimal placement considerations for furnace installation.

Installation Methods and Clearances

Guidelines for horizontal, non-suspended, and suspended installations with required clearances.

Venting, Combustion Air, and Fuel Systems

Requirements for chimney venting, combustion air, oil tanks, and piping installation.

Electrical Connections

Proper power supply wiring and dedicated circuits for furnace installation.

Blower, Burner, and Control Systems

Circulating Air Blower Operation

Details on blower operation, speed adjustments, and fan modes.

Oil Burner Setup and Operation

Burner alignment, nozzles, electrodes, and initial setup for optimal combustion.

Furnace Installation Set-Up Procedures

Final steps for furnace setup, including burner adjustments and temperature rise checks.

Wiring, Sequences, and Troubleshooting

Wiring Diagrams and Notes

Schematics and explanations for furnace electrical connections and wiring.

Detailed Sequence of Operations

Step-by-step descriptions of control sequences for R7184 and ST9103.

Troubleshooting Guides and Diagnostics

Using diagnostic lights, sequences, and tables to identify and resolve issues.

Unit Specifications and Parts Information

General Dimensions and Specifications

Physical dimensions, opening sizes, and ship weight for P*HMX and P3LBX models.

Repair Part Lists and Contact Information

Illustrated lists of replacement parts and contact details for customer support.

Related product manuals