To Next PageTo Next PageHow to restart York YJHMXH012BARR-FX Air Conditioner immediately?
Your York Air Conditioner will not restart immediately after being stopped. This is a protective measure that requires a 3-minute delay to safeguard the system. Similarly, if the electric plug is pulled out and reinserted, the protection circuit will activate for 3 minutes.
Why is my York YJHMXH012BARR-FX Air Conditioner cooling poorly?
Poor cooling in your York Air Conditioner can stem from several factors. Check if the air filter is dirty and clean it, ideally every 15 days. Ensure there are no obstructions blocking the air inlet and outlet. Verify that the temperature is set correctly, and that all doors and windows are closed. If direct sunlight streams through the window during cooling, use curtains. Also, consider if there are excessive heat sources or too many people in the room.
What to do if fan speed can’t be changed in dry mode of York Air Conditioner?
In DRY mode, when the room temperature is lower than the set temperature plus 2 degrees Celsius, your York Air Conditioner will run intermittently at low speed, regardless of the fan setting.
What to do if my York Air Conditioner blows out mist or steam?
The mist or steam coming from your York Air Conditioner during COOL or DRY operation is due to the rapid cooling of the indoor air.
Why does my York YJHMXH012BARR-FX Air Conditioner generate smells?
The smells from your York Air Conditioner are caused by the system circulating odors from the room's air, such as smells from furniture, paint, or cigarettes.
Why is my York Air Conditioner making noise?
If you hear a big noise from air flow during operation of your York Air Conditioner, the air filter may be too dirty. A swishing or gurgling noise may be heard due to refrigerant flowing in the system. A cracking noise may be heard, generated by the casing expanding or shrinking because of temperature changes.
General| Brand | York |
|---|---|
| Model | YJHMXH012BARR-FX |
| Category | Air Conditioner |
| Language | English |
Comprehensive safety warnings for operation, repair, and installation.
Detailed explanation of operating modes, fan control, and special functions.
How the outdoor unit's compressor, fan, and valve are controlled.
Precautions before commencing diagnostic procedures.
List of error codes, their meanings, and troubleshooting steps.
Steps and tools for installing the indoor unit.
Procedures and precautions for connecting electrical wiring.
Wiring and circuit diagrams for the indoor unit.
Wiring and circuit diagrams for the outdoor unit.
