YORKVILLE Synergy SA221S Service Manual

SERVICE MANUAL
Synergy SA221S
SA221S
SMT Disclaimer
Due to the complex nature of the use of SMT installed components
in Yorkville equipment, we highly caution all service technicians in
attempting to repair or replace SMT factory installed components.
Many of these components may be glued prior to initial soldering.
Replacing SMT components requires expensive
specialized de-soldering equipment and training.
Yorkville Sound will repair and replace defective SMT components
to ensure proper quality assurance and installation is maintained.
U.S.A.
Yorkville Sound Inc.
4625 Witmer Industrial Estate
Niagara Falls, New York
14305, USA
Voice: 716-297-2920
Fax: 716-297-3689
WORLD HEADQUARTERS
CANADA
Yorkville Sound Limited
550 Granite Court
Pickering, Ontario
L1W 3Y8 CANADA
Voice: 905-837-8481
Fax: 905-837-8746
Manual-Service-SA221S-00-1v2 • Feb 17/2022

YORKVILLE Synergy SA221S Specifications

General

LF Driver(s) Impedance (Ohms)	4
Power Amplifier Type	Class D
Cooling Scheme	Convection
Power Cable	Yes
Power Switch	Yes
Outputs	XLR
Output Connectors	XLR
Limiter	Yes
Enclosure Construction	Plywood
Grille	Steel
Amplifier Power	1000
Power Handling	2200 Watts Program (2 x 1100 Watts)
Inputs	XLR, 1/4"
Input Connectors	XLR
Input Sensitivity (Vrms Sine)	0.775
Other Features	DSP
Impedance	4 ohms
Input Impedance (Ohms)	20k
Weight (lbs/kg)	62lbs / 28.1kg
Weight	62lbs / 28.1kg