Need help?Do you have a question about the YORKVILLE VGM14 and is the answer not in the manual?
General| Brand | YORKVILLE |
|---|---|
| Model | VGM14 |
| Category | Music Mixer |
| Language | English |
Covers initial warnings, handling, and general precautions for safe operation.
Details power cord safety and guidelines for servicing the unit.
Details the XLR microphone input specifications and compatibility.
Explains connections for line-level sources, stereo inputs, and Hi-Z guitar inputs.
Explains the use of insert jacks for patching external signal processors.
Covers gain control operation, Set Level, and Clip LED indicators for optimal signal input.
Details the internal dual-slope soft-knee audio compressor on mono channels.
Describes the High-Pass Filter function for reducing low-frequency noise and rumble.
Details the 3-band EQ with shelving High/Low and sweepable Mid for mono channels.
Explains the usage of Mid and Sweep controls for sound shaping and feedback control.
Offers example EQ settings for common audio issues like feedback and tone shaping.
Details the 4-band EQ for stereo channels, covering frequency ranges and adjustments.
Describes the MON control for adjusting monitor mix levels and preventing feedback.
Explains the AUX send for creating additional mixes like monitors or effects.
Lists onboard digital effect presets and explains the EFX Send control for adding effects.
Covers Pan control for mono channels and Balance control for stereo channels.
Details the Mute switch function and the behavior of the Clip/Mute LED indicator.
Explains the PFL Solo switch for pre-fader listening and monitoring signals.
Describes the channel fader's control taper and its impact on signal routing.
Details the Media Input section, including RCA and USB connectivity and level control.
Explains the Media Output for recording, including level setting and USB signal conversion.
Describes the master EFX Send control for routing effects to the output and internal generator.
Guides on using EFX Send with internal effects and connecting external effects units.
Details the footswitch jack for controlling internal effects on/off.
Explains the function of the MON fader for adjusting monitor mix levels.
Explains the function of the MAIN fader for controlling the overall main mix volume.
Details the 9-band Graphic Equalizer assignable to Main or Mon mixes.
Describes the Phones Level control for headphone output volume.
Explains the Zone/Sub Level control for separate audio outputs.
Covers the Break switch function and VU meter operation.
Details top panel jacks and the LED lamp connector.
Explains rear panel power switch, fuse, and phantom power switch.
Describes the rear panel Main Out XLR and 1/4-inch balanced outputs.
Describes the Zone Out TRS phone jack for additional audio routing.
Guides on configuring the USB connection for computer audio input/output.
Details how computers recognize the VGM14 as a USB Audio CODEC.
Discusses audio latency in the VGM14 and potential solutions for Windows users.
Outlines the terms and conditions of the unlimited warranty for the product.
To Next Page
