Need help?Do you have a question about the YORKVILLE YX10P and is the answer not in the manual?
General| Active or Passive | Active |
|---|---|
| Frequency Response | 60Hz - 20kHz |
| Frequency Response (Hz +/- 3dB) | 70Hz - 18kHz |
| Max SPL | 120dB |
| Woofer Size | 10 inch |
| Tweeter Size | 1 inch |
| Inputs | 2 |
| Input Channels | 2 |
| Limiter | Yes |
| Pole Mount Adapter (1 3/8" - 3.5cm) | Yes |
| Flying Hardware | No |
| Power Output | 200 Watts |
| LF Driver(s) | 10 inch |
| HF Driver(s) | 1 inch |
| Input Connections | XLR |
| Enclosure Material | ABS |
| Weight | 15 kg / 33 lbs |
Covers reading instructions, packaging, environmental warnings, and general electrical precautions.
Covers power sources, hazards, power cord safety, and grounding.
Covers placement, heat, flames, exposure to water, and service.
Overview of the speaker's value, biamped power, enclosure, and key features.
Describes inputs, EQ, level controls, and link jacks.
Details Mic In, Line In, Link In, and Link Out connections for audio signals.
Covers Mic Gain, Level, Treble, and Bass controls for audio output.
Explains Signal/Limit LEDs, Shield Switch, and Power controls.
Instructions for setting the correct voltage for regional use.
Comprehensive list of all technical parameters for the YX10P speaker.
Diagram showing how to link multiple YX10Ps for microphone use.
Diagram illustrating connection of YX10Ps with an external mixer for stereo sound.
Diagram for connecting a single microphone or CD player to the YX10P.
Details on the transferable warranty, coverage, and exclusions.
To Next Page
