Operating Instructions
Functions：
1. Press key to start/stop, speed +/- .
2. Speed display 0.6-4.0MPH,Calorie display 0001-9999KCAL,Time display
01:00-99min
3. Display changes function menu (time, speed, distance, calories) every 3
seconds during operation.
4.Automatic stop at 99.00 minutes.
5.After 5 minutes of no operation after shutdown, it enters into a dormant state,
and the display screen goes off.
Speed control instructions
Each press of the speed+ button on the keypad or rocker during operation
increases the speed by 0.2MPH, a long press of the speed+ button increases
the speed by 0.2MPH continuously.
Each time you press the speed-button on the keyboard or remote controller
during operation, the speed will decrease by 0.2MPH; press and hold the
speed-button to continuously decrease at a speed of 0.2MPH.
Note: During speed operation, the display shows speed data, and if the speed
is not adjusted within 3 seconds, the display will cycle through the function
menus (time, speed, distance, calories) every 3 seconds.
Stopping instructions
In the running state, press the stop button on the remote control, the machine
stops running slowly.
To Next Page
Loading...